Bitte Smartwerte auf Fehler überprüfen

[Remiz]

Hi,
Könnte mal bitte jemand meine Smartwerte überprüfen, ob Fehler vorhanden, und
wenn, auf welcher SSD (2 Stück) oder Festplatte (4 Stück). Ich habe von der Materie keine Ahnung.
Daten im Anhang.
Der Aufgabenplaner hat eine geplante Aufgabe abgeschlossen.

Aufgabe: Smartwerte Script
Start: Tue, 04 Feb 2025 12:46:05 +0100
Ende: Tue, 04 Feb 2025 12:46:06 +0100
Aktueller Status: 0 (Normal)
Standardausgabe/Fehler:


-------------------------------------------------------------------------------

Health status of internal HDD's:

-------------------------------------------------------------------------------

Drive /dev/sda:

=== START OF INFORMATION SECTION ===
Model Family: Samsung based SSDs
Device Model: Samsung SSD 870 EVO 1TB
Firmware Version: SVT02B6Q
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: Unknown(0x09fc), ACS-4 T13/BSR INCITS 529 revision 5
SATA Version is: SATA >3.2 (0x1ff), 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Feb 4 12:46:05 2025 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Error Log Version: 1
No Errors Logged

ID | Attribute | (1) | (2) | (3) | (4)
=====|===================================|=====|=====|=====|===================
5 | Reallocated_Sector_Ct | 100 | 100 | 010 | 0 <!
9 | Power_On_Hours | 097 | 097 | 000 | 13777
12 | Power_Cycle_Count | 099 | 099 | 000 | 93
177 | Wear_Leveling_Count | 099 | 099 | 000 | 2 <!
179 | Used_Rsvd_Blk_Cnt_Tot | 100 | 100 | 010 | 0 <!
181 | Program_Fail_Cnt_Total | 100 | 100 | 010 | 0
182 | Erase_Fail_Count_Total | 100 | 100 | 010 | 0
183 | Runtime_Bad_Block | 100 | 100 | 010 | 0 <!
187 | Uncorrectable_Error_Cnt | 100 | 100 | 000 | 0
190 | Airflow_Temperature_Cel | 070 | 054 | 000 | 30
195 | ECC_Error_Rate | 200 | 200 | 000 | 0
199 | CRC_Error_Count | 100 | 100 | 000 | 0
235 | POR_Recovery_Count | 099 | 099 | 000 | 21
241 | Total_LBAs_Written | 099 | 099 | 000 | 7467195958
252 | Added_Bad_Flash_Blk_Ct | 100 | 100 | 000 | 317

(1) Value, (2) Worst, (3) Threshold, (4) Raw, <! Pre-fail value
-------------------------------------------------------------------------------

Drive /dev/sdb:

=== START OF INFORMATION SECTION ===
Model Family: Samsung based SSDs
Device Model: Samsung SSD 870 EVO 1TB
Firmware Version: SVT01B6Q
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: Unknown(0x09fc), ACS-4 T13/BSR INCITS 529 revision 5
SATA Version is: SATA >3.2 (0x1ff), 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Feb 4 12:46:05 2025 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Error Log Version: 1
ATA Error Count: 18 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 18 occurred at disk power-on lifetime: 14788 hours (616 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 40 00 2a 8c 40 Error: WP at LBA = 0x008c2a00 = 9185792

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 58 40 00 2a 8c 40 08 15d+23:47:23.816 WRITE FPDMA QUEUED
61 08 38 38 37 d3 40 07 15d+23:47:23.816 WRITE FPDMA QUEUED
60 08 30 b0 68 2e 40 06 15d+23:47:23.816 READ FPDMA QUEUED
60 08 28 a8 68 2e 40 05 15d+23:47:23.816 READ FPDMA QUEUED
60 08 20 a0 68 2e 40 04 15d+23:47:23.816 READ FPDMA QUEUED

Error 17 occurred at disk power-on lifetime: 14788 hours (616 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 50 30 68 2e 40 Error: UNC at LBA = 0x002e6830 = 3041328

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 50 30 68 2e 40 0a 15d+23:47:23.410 READ FPDMA QUEUED
60 08 48 28 68 2e 40 09 15d+23:47:23.410 READ FPDMA QUEUED
60 08 40 20 68 2e 40 08 15d+23:47:23.410 READ FPDMA QUEUED
60 08 38 18 68 2e 40 07 15d+23:47:23.410 READ FPDMA QUEUED
60 08 30 10 68 2e 40 06 15d+23:47:23.410 READ FPDMA QUEUED

Error 16 occurred at disk power-on lifetime: 14788 hours (616 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 18 b8 67 2e 40 Error: UNC at LBA = 0x002e67b8 = 3041208

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 18 b8 67 2e 40 03 15d+23:47:23.005 READ FPDMA QUEUED
61 08 08 48 44 45 40 01 15d+23:47:23.005 WRITE FPDMA QUEUED
60 08 00 b0 67 2e 40 00 15d+23:47:23.005 READ FPDMA QUEUED
ec 00 00 00 00 00 40 19 15d+23:47:23.005 IDENTIFY DEVICE
60 08 c8 a8 67 2e 40 19 15d+23:47:23.005 READ FPDMA QUEUED

Error 15 occurred at disk power-on lifetime: 14788 hours (616 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 e0 c0 39 34 40 Error: UNC at LBA = 0x003439c0 = 3422656

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 e0 c0 39 34 40 1c 15d+23:47:22.710 READ FPDMA QUEUED
60 28 d8 e0 13 33 40 1b 15d+23:47:22.710 READ FPDMA QUEUED
60 00 d0 e0 12 33 40 1a 15d+23:47:22.710 READ FPDMA QUEUED
60 b8 c8 58 61 32 40 19 15d+23:47:22.710 READ FPDMA QUEUED
60 00 c0 58 60 32 40 18 15d+23:47:22.710 READ FPDMA QUEUED

Error 14 occurred at disk power-on lifetime: 14788 hours (616 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 e0 98 68 2e 40 Error: UNC at LBA = 0x002e6898 = 3041432

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 40 e0 98 68 2e 40 1c 15d+23:47:22.431 READ FPDMA QUEUED
60 00 d8 70 85 2e 40 1b 15d+23:47:22.431 READ FPDMA QUEUED
60 00 d0 70 86 2e 40 1a 15d+23:47:22.431 READ FPDMA QUEUED
60 10 c8 70 87 2e 40 19 15d+23:47:22.431 READ FPDMA QUEUED
60 00 c0 88 93 2e 40 18 15d+23:47:22.431 READ FPDMA QUEUED

ID | Attribute | (1) | (2) | (3) | (4)
=====|===================================|=====|=====|=====|===================
5 | Reallocated_Sector_Ct | 076 | 076 | 010 | 270 <!
9 | Power_On_Hours | 096 | 096 | 000 | 15157
12 | Power_Cycle_Count | 099 | 099 | 000 | 141
177 | Wear_Leveling_Count | 099 | 099 | 000 | 7 <!
179 | Used_Rsvd_Blk_Cnt_Tot | 076 | 076 | 010 | 270 <!
181 | Program_Fail_Cnt_Total | 100 | 100 | 010 | 0
182 | Erase_Fail_Count_Total | 100 | 100 | 010 | 0
183 | Runtime_Bad_Block | 076 | 076 | 010 | 270 <!
187 | Uncorrectable_Error_Cnt | 099 | 099 | 000 | 18
190 | Airflow_Temperature_Cel | 068 | 051 | 000 | 32
195 | ECC_Error_Rate | 199 | 199 | 000 | 18
199 | CRC_Error_Count | 100 | 100 | 000 | 0
235 | POR_Recovery_Count | 099 | 099 | 000 | 22
241 | Total_LBAs_Written | 099 | 099 | 000 | 9349742459

(1) Value, (2) Worst, (3) Threshold, (4) Raw, <! Pre-fail value
-------------------------------------------------------------------------------

Drive /dev/sdc:

=== START OF INFORMATION SECTION ===
Model Family: Western Digital Gold
Device Model: WDC WD161KRYZ-01AGBB0
Firmware Version: 01.01H01
User Capacity: 16,000,900,661,248 bytes [16.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: Unknown(0x0ffc) (unknown minor revision code: 0x009c)
SATA Version is: SATA >3.2 (0x1ff), 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Feb 4 12:46:05 2025 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Error Log Version: 1
No Errors Logged

ID | Attribute | (1) | (2) | (3) | (4)
=====|===================================|=====|=====|=====|===================
1 | Raw_Read_Error_Rate | 100 | 100 | 001 | 0 <!
2 | Throughput_Performance | 135 | 135 | 054 | 100 <!
3 | Spin_Up_Time | 083 | 083 | 001 | 349 <!
4 | Start_Stop_Count | 100 | 100 | 000 | 131
5 | Reallocated_Sector_Ct | 100 | 100 | 001 | 0 <!
7 | Seek_Error_Rate | 099 | 099 | 001 | 65536 <!
8 | Seek_Time_Performance | 140 | 140 | 020 | 15 <!
9 | Power_On_Hours | 098 | 098 | 000 | 16097
10 | Spin_Retry_Count | 100 | 100 | 001 | 0 <!
12 | Power_Cycle_Count | 099 | 099 | 000 | 131
22 | Helium_Level | 100 | 100 | 025 | 100 <!
192 | Power-Off_Retract_Count | 100 | 100 | 000 | 819
193 | Load_Cycle_Count | 100 | 100 | 000 | 819
194 | Temperature_Celsius | 051 | 051 | 000 | 42
196 | Reallocated_Event_Count | 100 | 100 | 000 | 0
197 | Current_Pending_Sector | 100 | 100 | 000 | 0
198 | Offline_Uncorrectable | 100 | 100 | 000 | 0
199 | UDMA_CRC_Error_Count | 100 | 100 | 000 | 0

(1) Value, (2) Worst, (3) Threshold, (4) Raw, <! Pre-fail value
-------------------------------------------------------------------------------

Drive /dev/sdd:

=== START OF INFORMATION SECTION ===
Model Family: Western Digital Gold
Device Model: WDC WD161KRYZ-01AGBB0
Firmware Version: 01.01H01
User Capacity: 16,000,900,661,248 bytes [16.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: Unknown(0x0ffc) (unknown minor revision code: 0x009c)
SATA Version is: SATA >3.2 (0x1ff), 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Feb 4 12:46:05 2025 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Error Log Version: 1
ATA Error Count: 3
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 3 occurred at disk power-on lifetime: 2002 hours (83 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 43 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 d0 e8 2a 44 40 08 2d+05:21:39.403 READ FPDMA QUEUED
61 08 d8 28 df 21 40 08 2d+05:21:36.874 WRITE FPDMA QUEUED
60 08 c8 e0 2a 44 40 08 2d+05:21:36.857 READ FPDMA QUEUED
61 08 c0 e0 2a 44 40 08 2d+05:21:36.857 WRITE FPDMA QUEUED
ea 00 00 00 00 00 a0 08 2d+05:21:36.851 FLUSH CACHE EXT

Error 2 occurred at disk power-on lifetime: 2002 hours (83 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 43 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 e0 e0 2a 44 40 08 2d+05:21:36.694 READ FPDMA QUEUED
61 40 e8 e8 05 48 40 08 2d+05:21:34.433 WRITE FPDMA QUEUED
60 08 d8 d8 2a 44 40 08 2d+05:21:34.124 READ FPDMA QUEUED
60 08 d0 d0 2a 44 40 08 2d+05:21:34.124 READ FPDMA QUEUED
60 08 c8 c8 2a 44 40 08 2d+05:21:34.124 READ FPDMA QUEUED

Error 1 occurred at disk power-on lifetime: 2002 hours (83 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 43 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 50 58 a0 28 44 40 08 2d+05:21:33.803 READ FPDMA QUEUED
60 b0 60 f0 2d 44 40 08 2d+05:21:31.318 READ FPDMA QUEUED
60 00 50 a0 20 44 40 08 2d+05:21:31.315 READ FPDMA QUEUED
60 60 48 40 18 44 40 08 2d+05:21:31.313 READ FPDMA QUEUED
60 a0 40 a0 10 44 40 08 2d+05:21:31.312 READ FPDMA QUEUED

ID | Attribute | (1) | (2) | (3) | (4)
=====|===================================|=====|=====|=====|===================
1 | Raw_Read_Error_Rate | 100 | 100 | 001 | 0 <!
2 | Throughput_Performance | 135 | 135 | 054 | 100 <!
3 | Spin_Up_Time | 083 | 083 | 001 | 352 <!
4 | Start_Stop_Count | 100 | 100 | 000 | 131
5 | Reallocated_Sector_Ct | 100 | 100 | 001 | 0 <!
7 | Seek_Error_Rate | 100 | 100 | 001 | 0 <!
8 | Seek_Time_Performance | 140 | 140 | 020 | 15 <!
9 | Power_On_Hours | 098 | 098 | 000 | 16097
10 | Spin_Retry_Count | 100 | 100 | 001 | 0 <!
12 | Power_Cycle_Count | 099 | 099 | 000 | 131
22 | Helium_Level | 100 | 100 | 025 | 100 <!
192 | Power-Off_Retract_Count | 100 | 100 | 000 | 818
193 | Load_Cycle_Count | 100 | 100 | 000 | 818
194 | Temperature_Celsius | 050 | 050 | 000 | 43
196 | Reallocated_Event_Count | 100 | 100 | 000 | 0
197 | Current_Pending_Sector | 100 | 100 | 000 | 0
198 | Offline_Uncorrectable | 100 | 100 | 000 | 0
199 | UDMA_CRC_Error_Count | 100 | 100 | 000 | 0

(1) Value, (2) Worst, (3) Threshold, (4) Raw, <! Pre-fail value
-------------------------------------------------------------------------------

Drive /dev/sde:

=== START OF INFORMATION SECTION ===
Model Family: Red
Device Model: WDC WD120EFAX-68UNTN0
Firmware Version: 81.00A81
User Capacity: 12,000,138,625,024 bytes [12.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Feb 4 12:46:06 2025 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Error Log Version: 1
No Errors Logged

ID | Attribute | (1) | (2) | (3) | (4)
=====|===================================|=====|=====|=====|===================
1 | Raw_Read_Error_Rate | 100 | 100 | 016 | 0 <!
2 | Throughput_Performance | 129 | 129 | 054 | 104
3 | Spin-up_Time | 163 | 163 | 024 | 34386149779 <!
4 | Start/Stop_Count | 100 | 100 | 000 | 959
5 | Re-allocated_Sector_Count | 100 | 100 | 005 | 0 <!
7 | Seek_Error_Rate | 100 | 100 | 067 | 0
8 | Seek_Time_Performance | 128 | 128 | 020 | 18
9 | Power-on_Hours_Count | 097 | 097 | 000 | 24678
10 | Spin_Retry_Count | 100 | 100 | 060 | 0
12 | Drive_Power_Cycle_Count | 100 | 100 | 000 | 254
22 | Internal_Environment_Status_He... | 100 | 100 | 025 | 100 <!
192 | Power_Off_Restart_Count | 099 | 099 | 000 | 1797
193 | Load/Unload_Cycles | 099 | 099 | 000 | 1797
194 | Temperature | 158 | 158 | 000 | 41
196 | Relocation_Event_Count | 100 | 100 | 000 | 0
197 | Current_Pending_Sector_Count | 100 | 100 | 000 | 0
198 | Off-Line_Scan_Uncorrectable_Se... | 100 | 100 | 000 | 0
199 | Ultra_DMA_CRC_Error_Count/Fram... | 200 | 200 | 000 | 0

(1) Value, (2) Worst, (3) Threshold, (4) Raw, <! Pre-fail value
-------------------------------------------------------------------------------

Drive /dev/sdf:

=== START OF INFORMATION SECTION ===
Model Family: Red
Device Model: WDC WD120EFAX-68UNTN0
Firmware Version: 81.00A81
User Capacity: 12,000,138,625,024 bytes [12.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Feb 4 12:46:06 2025 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Error Log Version: 1
No Errors Logged

ID | Attribute | (1) | (2) | (3) | (4)
=====|===================================|=====|=====|=====|===================
1 | Raw_Read_Error_Rate | 100 | 100 | 016 | 0 <!
2 | Throughput_Performance | 127 | 127 | 054 | 112
3 | Spin-up_Time | 159 | 159 | 024 | 34386870686 <!
4 | Start/Stop_Count | 100 | 100 | 000 | 959
5 | Re-allocated_Sector_Count | 100 | 100 | 005 | 0 <!
7 | Seek_Error_Rate | 100 | 100 | 067 | 0
8 | Seek_Time_Performance | 140 | 140 | 020 | 15
9 | Power-on_Hours_Count | 097 | 097 | 000 | 24678
10 | Spin_Retry_Count | 100 | 100 | 060 | 0
12 | Drive_Power_Cycle_Count | 100 | 100 | 000 | 254
22 | Internal_Environment_Status_He... | 100 | 100 | 025 | 100 <!
192 | Power_Off_Restart_Count | 099 | 099 | 000 | 1799
193 | Load/Unload_Cycles | 099 | 099 | 000 | 1799
194 | Temperature | 171 | 171 | 000 | 38
196 | Relocation_Event_Count | 100 | 100 | 000 | 0
197 | Current_Pending_Sector_Count | 100 | 100 | 000 | 0
198 | Off-Line_Scan_Uncorrectable_Se... | 100 | 100 | 000 | 0
199 | Ultra_DMA_CRC_Error_Count/Fram... | 200 | 200 | 000 | 0

(1) Value, (2) Worst, (3) Threshold, (4) Raw, <! Pre-fail value
-------------------------------------------------------------------------------



Von Diskstation1618
Danke

Gr. Reinhold

 

[Sunweb]

Steht doch überall dabei , muss man nur lesen.
Und du hast doch schon eine Diskstation mit einer Oberfläche die dir alles in Bunt Zusammengefasst darstellt.
Da muss ma sich doch nicht irgendwelche Daten raussuchen, die man nicht versteht und gekonnt die Daten die einfach dargestellt werden ignorieren?

Drive /dev/sda:
SMART overall-health self-assessment test result: PASSED
No Errors Logged

Drive /dev/sdb:
SMART overall-health self-assessment test result: PASSED
ATA Error Count: 18

Drive /dev/sdc:
SMART overall-health self-assessment test result: PASSED
No Errors Logged

Drive /dev/sdd:
SMART overall-health self-assessment test result: PASSED
ATA Error Count: 3

Drive /dev/sde:
SMART overall-health self-assessment test result: PASSED
No Errors Logged

Drive /dev/sdf:
SMART overall-health self-assessment test result: PASSED
No Errors Logged

 

[midwed]

@Sunweb Warum sich die Arbeit machen? Gibt doch die censored User im CB-Forum. 🫠

# Richtig posten - Checkliste

 

[Remiz]

Danke,
ist also alles OK,
war mir nur unsicher bei ATA Error Count: 18
Bin nicht zu faul um zu suchen, sondern schon etwas älter
und bin also kein Experte.

Gr Reinhold

 

[Fujiyama]

Ist natürlich die Frage was du dir durchs die Kontrolle erhoffst.
Gibt es den probleme?

 

[Sunweb]

Du musst ja kein Experte sein, aber sich so einen Datenwulst rauszusuchen, wenn es doch ein einfach sein könnte:

Da steht in grün: Normal

 

[Remiz]

Ich habe ab und zu Schreibfehler bei Musik Flac Dateien die nicht gelesen werden können, in meiner Diskstation. Ich muss dann diese Dateien so oft vom PC auf die Syno übertragen bis sie gelesen werden kann.

 

[dermoritz]

klassischer use case für chatgpt
.... (let me ask chatgpt for you)

"

SMART Analysis Summary​

Drive /dev/sda (Samsung 870 EVO 1TB)​

• Overall Health: ✅ Passed
• Critical Issues:
  • ✅ No reallocated sectors (Reallocated_Sector_Ct = 0).
  • ✅ No used reserved blocks.
  • ✅ No uncorrectable errors.
  • ✅ Wear leveling count is very low (Wear_Leveling_Count = 2), meaning minimal wear.
• Verdict: Healthy, no issues detected.

---

Drive /dev/sdb (Samsung 870 EVO 1TB)​

• Overall Health: ✅ Passed
• Critical Issues:
  • ⚠️ Reallocated Sectors: 270 (should ideally be 0).
  • ⚠️ Runtime Bad Blocks: 270.
  • ⚠️ Used Reserved Blocks: 270.
  • ⚠️ Uncorrectable Errors: 18 recorded.
  • ❌ ATA Error Count: 18 errors logged.
• Verdict: Degraded – Drive has developed bad sectors.
  • Recommended Action: Monitor closely, consider replacing if errors increase.

---

Drive /dev/sdc (WD Gold 16TB)​

• Overall Health: ✅ Passed
• Critical Issues:
  • ✅ No reallocated sectors.
  • ✅ No uncorrectable errors.
  • ✅ No ATA errors.
• Verdict: Healthy, no issues detected.

---

Drive /dev/sdd (WD Gold 16TB)​

• Overall Health: ✅ Passed
• Critical Issues:
  • ⚠️ ATA Errors: 3 errors logged.
  • ✅ No reallocated sectors.
  • ✅ No uncorrectable errors.
• Verdict: Minor issues – Monitor but no immediate concern.
  • Recommended Action: If errors increase, consider further diagnostics.

---

Final Recommendations​

• /dev/sda and /dev/sdc – Healthy, no issues.
• /dev/sdb – Degraded, has bad sectors. Monitor closely and consider replacement.
• /dev/sdd – Minor issues, but overall healthy. Monitor for increased errors.

"
----------------------------------------------------------------------------------------------------------------
DEEPSEEK
(scheint vollständiger?):

"
Here’s an analysis of the SMART values for each drive:

---

Drive /dev/sda (Samsung SSD 870 EVO 1TB)​

• Health Status: PASSED
• Key Observations:
  
  • Power_On_Hours: 13,777 hours (approximately 1.57 years of use).
  • Wear_Leveling_Count: Raw value is 2, indicating minimal wear.
  • Reallocated_Sector_Ct: 0, no reallocated sectors.
  • Used_Rsvd_Blk_Cnt_Tot: 0, no reserved blocks used.
  • Runtime_Bad_Block: 0, no runtime bad blocks.
  • Temperature: 30°C, within normal operating range.
• Conclusion: The drive is in excellent health with no signs of wear or errors.

---

Drive /dev/sdb (Samsung SSD 870 EVO 1TB)​

• Health Status: PASSED
• Key Observations:
  
  • Power_On_Hours: 15,157 hours (approximately 1.73 years of use).
  • Wear_Leveling_Count: Raw value is 7, indicating minimal wear.
  • Reallocated_Sector_Ct: 270, which is a concern as it indicates sectors have been reallocated.
  • Used_Rsvd_Blk_Cnt_Tot: 270, matching the reallocated sectors.
  • Runtime_Bad_Block: 270, indicating bad blocks during runtime.
  • Uncorrectable_Error_Cnt: 18, indicating errors that could not be corrected.
  • Temperature: 32°C, within normal operating range.
• Conclusion: This drive shows signs of degradation, particularly with reallocated sectors and uncorrectable errors. It should be monitored closely, and a backup or replacement should be considered.

---

Drive /dev/sdc (WDC WD161KRYZ-01AGBB0 16TB)​

• Health Status: PASSED
• Key Observations:
  
  • Power_On_Hours: 16,097 hours (approximately 1.84 years of use).
  • Reallocated_Sector_Ct: 0, no reallocated sectors.
  • Spin_Up_Time: 349 ms, within normal range.
  • Temperature: 42°C, slightly warm but within acceptable limits.
  • Helium_Level: 100, indicating the drive's internal environment is stable.
• Conclusion: The drive is in good health with no significant issues.

---

Drive /dev/sdd (WDC WD161KRYZ-01AGBB0 16TB)​

• Health Status: PASSED
• Key Observations:
  
  • Power_On_Hours: 16,097 hours (approximately 1.84 years of use).
  • Reallocated_Sector_Ct: 0, no reallocated sectors.
  • Spin_Up_Time: 352 ms, within normal range.
  • Temperature: 43°C, slightly warm but within acceptable limits.
  • Helium_Level: 100, indicating the drive's internal environment is stable.
  • ATA Error Count: 3, but no uncorrectable errors or pending sectors.
• Conclusion: The drive is in good health, but the ATA errors should be monitored for any increase.

---

Drive /dev/sde (WDC WD120EFAX-68UNTN0 12TB)​

• Health Status: PASSED
• Key Observations:
  
  • Power_On_Hours: 24,678 hours (approximately 2.82 years of use).
  • Reallocated_Sector_Ct: 0, no reallocated sectors.
  • Spin-up_Time: Extremely high raw value (34386149779), but this is likely a misinterpretation or firmware quirk.
  • Temperature: 41°C, within normal operating range.
  • Load/Unload_Cycles: 1,797, which is moderate for this type of drive.
• Conclusion: The drive is in good health with no significant issues.

---

Drive /dev/sdf (WDC WD120EFAX-68UNTN0 12TB)​

• Health Status: PASSED
• Key Observations:
  
  • Power_On_Hours: 24,678 hours (approximately 2.82 years of use).
  • Reallocated_Sector_Ct: 0, no reallocated sectors.
  • Spin-up_Time: Extremely high raw value (34386870686), but this is likely a misinterpretation or firmware quirk.
  • Temperature: 38°C, within normal operating range.
  • Load/Unload_Cycles: 1,799, which is moderate for this type of drive.
• Conclusion: The drive is in good health with no significant issues.

---

Summary​

• /dev/sda: Excellent health.
• /dev/sdb: Degrading health, monitor closely and consider replacement.
• /dev/sdc, /dev/sdd, /dev/sde, /dev/sdf: All in good health with no immediate concerns.

If /dev/sdb is part of a RAID array or critical storage, it is recommended to replace it soon to avoid potential data loss. For the other drives, continue regular monitoring, but no immediate action is required.






New chat
"

bitte selbst checken ob das vernünftig ist

 

[duAffentier]

Von Diskstation1618
Danke

Die Analyse der SMART-Werte Ihrer Festplatten zeigt, dass die meisten Laufwerke in gutem Zustand sind. Allerdings weist das Laufwerk /dev/sdb einige kritische Werte auf:

• Reallocated_Sector_Ct: 270 Sektoren wurden neu zugewiesen.
• Used_Rsvd_Blk_Cnt_Tot: 270 reservierte Blöcke wurden verwendet.
• Runtime_Bad_Block: 270 fehlerhafte Blöcke während des Betriebs.
• Uncorrectable_Error_Cnt: 18 unkorrigierbare Fehler wurden registriert.

Diese Werte deuten auf physische Probleme mit der Festplatte hin. Es ist ratsam, die Daten auf /dev/sdb umgehend zu sichern und die Festplatte zu ersetzen, um Datenverlust zu vermeiden.

 

[Remiz]

Ich werde die dann mal tauschen, Backup ist mehrfach vorhanden.
Danke