Hallo,
folgende Platte wurde in 2005 neu gekauft. Da Linux manchmal beim booten bei fsck hängen blieb habe ich mal die smartmontools angeworfen um einige Infos/Fehlermeldungen zu erhalten. Wie würdet ihr die Ausgaben deuten?
folgende Platte wurde in 2005 neu gekauft. Da Linux manchmal beim booten bei fsck hängen blieb habe ich mal die smartmontools angeworfen um einige Infos/Fehlermeldungen zu erhalten. Wie würdet ihr die Ausgaben deuten?
Code:
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG SP0411N
Serial Number: xxxxxxxxxxxxxx
Firmware Version: TW100-08
User Capacity: 40.060.403.712 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Thu Nov 22 16:26:54 2007 CET
==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details.
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
Failed Attributes:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
198 Offline_Uncorrectable 0x0031 001 001 010 Pre-fail Offline FAILING_NOW 484
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 051 Pre-fail Always - 778
3 Spin_Up_Time 0x0007 075 074 000 Pre-fail Always - 4672
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 92
5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 253 253 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0024 090 089 000 Old_age Offline - 9757
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 91930
10 Spin_Retry_Count 0x0013 253 253 049 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 46
194 Temperature_Celsius 0x0022 154 142 000 Old_age Always - 28
195 Hardware_ECC_Recovered 0x000a 100 100 000 Old_age Always - 112655550
196 Reallocated_Event_Count 0x0012 001 001 000 Old_age Always - 484
197 Current_Pending_Sector 0x0033 253 253 010 Pre-fail Always - 0
198 Offline_Uncorrectable 0x0031 001 001 010 Pre-fail Offline FAILING_NOW 484
199 UDMA_CRC_Error_Count 0x000b 100 100 051 Pre-fail Always - 0
200 Multi_Zone_Error_Rate 0x000b 100 100 051 Pre-fail Always - 0
201 Soft_Read_Error_Rate 0x000b 099 097 051 Pre-fail Always - 454
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 00% 765 27005325
# 2 Extended offline Completed: read failure 00% 762 27005325
# 3 Extended offline Completed: read failure 00% 569 27005325
# 4 Short offline Completed without error 00% 565 -
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
Warning: ATA error count 256 inconsistent with error log pointer 5
ATA Error Count: 256 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 256 occurred at disk power-on lifetime: 521 hours (21 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 00 00 c2 4f e0 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 da 00 00 c2 4f e0 00 10:47:19.063 SMART RETURN STATUS
ec 00 00 f6 6f 8d e0 00 10:47:18.938 IDENTIFY DEVICE
ec 00 00 6e a7 40 e0 00 00:01:11.313 IDENTIFY DEVICE
ef 42 fe 00 00 00 e0 00 00:01:11.250 SET FEATURES [Enable AAM]
ec 00 01 00 00 00 e0 00 00:01:11.250 IDENTIFY DEVICE