WIN 11 Clone NVME to NVME (Inaccessible Boot Drive Error)

[Shiniri]

So ive bought the LEXAR 620NM 1TB NVME to replace my 970 EVO Plus 500GB NVME.

I Cloned my Drive with Macrium Reflect and a second time with CloneZilla.

I run Into a Bootloop with "Inaccessible Boot Drive".

Ive tried the following:

• EasyUEFI Boot repair
• BCD Boot Repair
• Secure Boot, Fast Boot, & TPM on/Off and changing to legacy BIOS instead of UEFI
• Repair Tool doesnt Work either
• Original Drive Boots
• New installs in new Drive works AS Well

I really have no Idea what could Help at this Point Driver Support shouldnt be a Problem since both Drives are NVMEs.
Both Times I cloned I get the Same Error
Windows Boot Manager is found

Anyone has any other Idea ?

I mean i have starting to Setup a new Windows Install but still have the Original Drive to try again which would Help big time.

 

[mr.malcom]

Try to boot the cloned Drive in Save Mode and delete the NVME Driver / Controller.

 

[SSD960]

Is the new SSD as the primary Boot device in Bios?

 

[s1ave77]

Error normaly implies that the ESP ist broken. We had that error some weeks ago.

A repair via Win setup media Recovery CMD or Hirens BootCD can rebuild the partition, only needs an initialisation with bcdboot in CMD.

 

[Pilatesjünger]

All Uefi Mode?

 

[Shiniri]

Is the new SSD as the primary Boot device in Bios?

Yes IT Is found and the standard (Windows Bootloader - LEXAR 620NM)

Ergänzung (17. Mai 2024)

Error normaly implies that the ESP ist broken. We had that error some weeks ago.

A repair via Win setup media Recovery CMD or Hirens BootCD can rebuild the partition, only needs an initialisation with bcdboot in CMD.

Tried rebuilding/repairing via Hirens and EasyUEFI and BCD Boot Repair (all via MediCat)

Ergänzung (17. Mai 2024)

All Uefi Mode?

Yeah tried booting in UEFI AS Well AS legacy

 

[Pilatesjünger]

Did you clone with a uefi boot stick?