Frage zu SMART Werten

[Riseofdead]

Hallo

Ich hab in meinem alten Netbook derzeit eine 2,5 Zoll Platte mit 500 GB verbaut die nun seit 124 Tagen durchgehend ihren Dienst verrichtet. Vorher war die Platte in einem Laptop ca 2 Jahre drin. Und ganz ganz am Anfang war es eine Externe Festplatte. Man sieht die Platte hat schon einiges auf dem Buckel. Nun möchte ich wissen ob die Platte schon gefährdet ist den Geist aufzugeben.

Ich hab dazu auf meinem Server smartctl installiert und den Befehl smartctl -t long /dev/sda ausgeführt. Das Programm hat mir dann gesagt das ich nach 140 Minuten die Ergebnisse vorliegen hab. Diese hab ich mit smartctl -a /dev/sda auch abgerufen und in eine .txt Datei umgeleitet.

Das Ergebnis schaut so aus:

Spoiler

smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint M7
Device Model: SAMSUNG HM500JI
Serial Number: S1WFJ9CZ846667
LU WWN Device Id: 5 0024e9 2033b9207
Firmware Version: 2AC101C4
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Tue Feb 17 19:34:53 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 8280) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 138) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 555
2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
3 Spin_Up_Time 0x0023 089 089 025 Pre-fail Always - 3360
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 372
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 6014
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 095 095 000 Old_age Always - 5075
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 744
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 212
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 064 056 000 Old_age Always - 36 (Min/Max 18/48)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 097 097 000 Old_age Always - 2072
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 103
223 Load_Retry_Count 0x0032 095 095 000 Old_age Always - 5075
225 Load_Cycle_Count 0x0032 063 063 000 Old_age Always - 377492

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 6010 33558208

Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed_read_failure [90% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Falls es irgendwelche Formatierungsprobleme gibt könnt ihr den Bericht auch unter https://pastebin.com/Y5hMKSbs abrufen.

Wie sieht meine Platte aus? Kann ich die noch Gefahrlos laufen lassen für paar Jahre oder wird die langsam defekt?

 

[Baya]

Einfacher geht's mit dem Tool CrystalDiskInfo
Lad dir mal das runter und stell den Rohert unter Einstellungen Erweitert auf DEZ10 um...!

 

[AdoK]

Bitte die extra oben angepinnten Sammelthemen beachten und benutzen!

[Sammelthread] HDD-Probleme, SMART-Analysen