Office PC umrüsten auf AMD - wie ?

[da_reini]

@fixedwater
Kann man schon sicher bei den meisten irgendwie aktivieren.

Aber (meines Wissens ) ist es mit GRUB alleine nicht getan. In GRUB kann man einstellen ob man Boot/Splash Screens (wie zB Plymouth bei Ubuntu) aktivieren will oder nicht. Aber die müssen vorher mal installiert und konfiguriert werden. Bei manchen Distros ist das standardmäßig der Fall, bei anderen nicht.
Aber es ist nicht so, dass man bei jeder Distro einen Schalter in GRUB umlegen kann, um das zu aktivieren.

Und darum wäre halt mein Rat an den TE, der sich hier ja nicht so gut auskennt, ein OS zu nehmen, wo das schon richtig vorkonfiguriert ist.

@TE: alte Hardware ist unter Linux meist besser unterstützt. D.h. normalerweise läuft alte Hardware etwas runder. Darum kann es durchaus sein, dass du, wenn du jetzt einen neuen AMD Rechner kaufst, sogar noch mehr Meldungen dazukommen. Möglicherweise richtige Fehlermeldungen, die du beheben musst.

 

[JollyRoger2408]

habe häufiger kryptische Angaben beim Bootvorgang, welche mich stören.
...
Die Angaben laufen im Bootvorgang ab und sichtbar am Monitor.

Jetzt mach kein Staatsgeheimnis draus und verrate uns, was dich da quält.

BTW,
dein PC ist noch sehr gut für die erwähnten Anforderungen geeignet. Ich sehe hier keinen Handlungsbedarf.

 

[fixedwater]

@da_reini Die Grub-Option "quiet" ist entscheidend. Dort kannst Du "quiet splash" (ohne Meldungen mit Splash) oder auch einfach "quiet" bzw. ich glaube auch "quiet nosplash" (keine Meldungen, ohne Splash) eintragen. Ist wahrscheinlich noch weiter konfigurierbar, aber das ist jetzt mal das, was mir gerade so einfällt Es gibt aber auch den mit Vorsicht zu genießenden Grub-Customizer als grafisches Tool, wobei ich fast glaube, das SuSe sowas in yast gleich mitbringt... Klar, ist das nix, was man als Unerfahrener einfach so macht, aber es geht... Übrigens kenne ich eigentlich fast nur Distributionen, die im Default ohne Meldungen booten. Die aktuelle Opensuse Leap auch.

 

[da_reini]

@fixedwater: achso ok. gut zu wissen.

Hat man dann bei quiet nosplash einfach einen schwarzen Bildschirm während des gesamten Bootvorgangs oder wie? Wäre zwar mir zu "gefährlich", wenn es wo ein Problem gibt will ich es wissen Aber ist ja vielleicht genau das was der TE will...

Aber was ich sagen wollte: so einen Windows-ähnlich Bootscreen wo man nur eine Ladeanimation sieht, bekommt man meines Wissens nicht mit GRUB alleine.

 

[fixedwater]

Hat man dann bei quiet nosplash einfach einen schwarzen Bildschirm während des gesamten Bootvorgangs oder wie?

Hier ist das für Ubuntu mal erklärt - sieht so aus, als wenn quiet doch immer mit splash kombiniert werden muss:

https://wiki.ubuntuusers.de/Bootoptionen/

(bei Optionen für die Bootmeldungen)

Aber das ist hier ja alles schon ziemlich am Thema vorbei...

 

[Wilhelm14]

Da der Rechner sehr betagt ist

Bei Office und Browser wird man aber keinen Unterschied merken, da müsste man schon raten, welcher Rechner schneller ist. In vielen Fällen ist ein neuer Rechner schneller, weil seine Neuinstallation mit der alten, vergurkten Installation verglichen wird. Der Geschwindigkeitszuwachs liegt dann nicht an der Hardware.

Dein Rechner scheint UEFI zu können. Betriebssysteme als UEFI installiert sollten richtig flott laufen. Zu deinen störenden Schriften beim Boot müsstest du Bilder liefern. Das kann alles mögliche sein und höchstwahrscheinlich normal. Und wie schon gesagt, das laufende Linux-Terminal kann unterdrückt werden. Ich meine bei Zorin OS beispielsweise pulsiert ein Zorin Logo usw. so wie bei Windows die Kachel und der Kringel. BIOS-Meldungen können auch ausgeblendet werden.

Wie laut ein Rechner ist, hängt in erster Linie von der Einstellung der Lüftersteuerung im BIOS ab. Falsch eingestellt sind auch neue, teure CPU-Kühler (dessen Lüfter) nicht von alleine leise.

 

[fsh]

Hallo,

hier die >> dmesg Ausgabe <<mit den für mich irritierenden Fehlermeldungen und den folgenden Überlegungen, ob ein Hardwarefehler vorliegt dessen Behebung mittels Ümüsten des PC auf AMD Basis behoben werden kann:

Sowie die Angaben zu den Kernel Parametern.

dmesg Ausgabe:

[ 0.204294] rcu: Hierarchical SRCU implementation.
[ 0.204742] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.204779] smp: Bringing up secondary CPUs ...
[ 0.204849] x86: Booting SMP configuration:
[ 0.204849] .... node #0, CPUs: #1 #2 #3
[ 0.212182] smp: Brought up 1 node, 4 CPUs
[ 0.212182] smpboot: Max logical packages: 1
[ 0.212182] smpboot: Total of 4 processors activated (27197.44 BogoMIPS)
[ 0.224143] node 0 initialised, 1096318 pages in 12ms
[ 0.224326] devtmpfs: initialized
[ 0.224326] x86/mm: Memory block size: 128MB
[ 0.228373] PM: Registering ACPI NVS region [mem 0xdee09000-0xdee8cfff] (540672 bytes)
[ 0.228373] PM: Registering ACPI NVS region [mem 0xdf140000-0xdf384fff] (2379776 bytes)
[ 0.228373] PM: Registering ACPI NVS region [mem 0xdf393000-0xdf3bffff] (184320 bytes)
[ 0.228373] PM: Registering ACPI NVS region [mem 0xdf3c5000-0xdf407fff] (274432 bytes)
[ 0.228373] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.228373] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.228373] pinctrl core: initialized pinctrl subsystem
[ 0.228373] PM: RTC time: 09:00:36, date: 2020-02-20
[ 0.228373] thermal_sys: Registered thermal governor 'fair_share'
[ 0.228373] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.228373] thermal_sys: Registered thermal governor 'step_wise'
[ 0.228373] thermal_sys: Registered thermal governor 'user_space'
[ 0.228373] NET: Registered protocol family 16
[ 0.228437] audit: initializing netlink subsys (disabled)
[ 0.228442] audit: type=2000 audit(1582189236.052:1): state=initialized audit_enabled=0 res=1
[ 0.228442] cpuidle: using governor ladder
[ 0.228442] cpuidle: using governor menu
[ 0.228442] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.228442] ACPI: bus type PCI registered
[ 0.228442] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.228442] PCI: Using configuration type 1 for base access
[ 0.228442] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.228618] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.229173] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.229173] ACPI: Added _OSI(Module Device)
[ 0.229173] ACPI: Added _OSI(Processor Device)
[ 0.229173] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.229173] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.229173] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.229173] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.229173] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.239267] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.240772] ACPI: Dynamic OEM Table Load:
[ 0.240777] ACPI: SSDT 0xFFFF9F84C7E87000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.241566] ACPI: Dynamic OEM Table Load:
[ 0.241569] ACPI: SSDT 0xFFFF9F84C7D44C00 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.242179] ACPI: Dynamic OEM Table Load:
[ 0.242181] ACPI: SSDT 0xFFFF9F85D9A95600 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.243351] ACPI: EC: EC started
[ 0.243351] ACPI: EC: interrupt blocked
[ 0.243358] ACPI: \SB.PCI0.LPCB.EC0_: Used as first EC
[ 0.243359] ACPI: \SB.PCI0.LPCB.EC0_: GPE=0x18, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.243360] ACPI: \SB.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[ 0.243360] ACPI: Interpreter enabled
[ 0.243380] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.243380] ACPI: Using IOAPIC for interrupt routing
[ 0.243404] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.243635] ACPI: Enabled 9 GPEs in block 00 to 3F
[ 0.251125] ACPI: Power Resource [FN00] (off)
[ 0.251203] ACPI: Power Resource [FN01] (off)
[ 0.251275] ACPI: Power Resource [FN02] (off)
[ 0.251349] ACPI: Power Resource [FN03] (off)
[ 0.251422] ACPI: Power Resource [FN04] (off)
[ 0.252032] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.252036] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.252121] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.252133] acpi PNP0A08:00: MMCONFIG is disabled, can't access extended PCI configuration space under this bridge.
[ 0.252649] PCI host bridge to bus 0000:00
[ 0.252651] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.252652] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.252652] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.252653] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.252654] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.252655] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.252656] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.252656] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.252657] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.252658] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[ 0.252659] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.252666] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.252756] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.252785] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.252896] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.252919] pci 0000:00:16.0: reg 0x10: [mem 0xf762c000-0xf762c00f 64bit]
[ 0.252989] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.253077] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
[ 0.253095] pci 0000:00:19.0: reg 0x10: [mem 0xf7600000-0xf761ffff]
[ 0.253102] pci 0000:00:19.0: reg 0x14: [mem 0xf7629000-0xf7629fff]
[ 0.253110] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
[ 0.253166] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.253258] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.253278] pci 0000:00:1a.0: reg 0x10: [mem 0xf7628000-0xf76283ff]
[ 0.253358] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.253451] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.253467] pci 0000:00:1b.0: reg 0x10: [mem 0xf7620000-0xf7623fff 64bit]
[ 0.253529] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.253617] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.253701] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.253796] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.253879] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.253975] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.254058] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.254156] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.254240] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.254337] pci 0000:00:1c.6: [8086:244e] type 01 class 0x060401
[ 0.254421] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.254515] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[ 0.254598] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.254696] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.254717] pci 0000:00:1d.0: reg 0x10: [mem 0xf7627000-0xf76273ff]
[ 0.254796] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.254891] pci 0000:00:1f.0: [8086:1c46] type 00 class 0x060100
[ 0.255076] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.255092] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
[ 0.255099] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
[ 0.255106] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
[ 0.255112] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
[ 0.255119] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.255126] pci 0000:00:1f.2: reg 0x24: [mem 0xf7626000-0xf76267ff]
[ 0.255164] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.255249] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.255266] pci 0000:00:1f.3: reg 0x10: [mem 0xf7625000-0xf76250ff 64bit]
[ 0.255285] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.255412] pci 0000:01:00.0: [10de:1402] type 00 class 0x030000
[ 0.255422] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.255431] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.255440] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.255446] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.255451] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.255456] pci 0000:01:00.0: enabling Extended Tags
[ 0.255464] pci 0000:01:00.0: Enabling HDA controller
[ 0.255496] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[ 0.255528] pci 0000:01:00.1: [10de:0fba] type 00 class 0x040300
[ 0.255539] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 0.255573] pci 0000:01:00.1: enabling Extended Tags
[ 0.255640] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.255642] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.255643] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.255645] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.255689] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.255761] pci 0000:03:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.255791] pci 0000:03:00.0: reg 0x10: [mem 0xf7500000-0xf7501fff 64bit]
[ 0.255926] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.256016] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.256022] pci 0000:00:1c.1: bridge window [mem 0xf7500000-0xf75fffff]
[ 0.256106] pci 0000:04:00.0: [197b:2362] type 00 class 0x010185
[ 0.256146] pci 0000:04:00.0: reg 0x10: [io 0xd040-0xd047]
[ 0.256161] pci 0000:04:00.0: reg 0x14: [io 0xd030-0xd033]
[ 0.256176] pci 0000:04:00.0: reg 0x18: [io 0xd020-0xd027]
[ 0.256191] pci 0000:04:00.0: reg 0x1c: [io 0xd010-0xd013]
[ 0.256206] pci 0000:04:00.0: reg 0x20: [io 0xd000-0xd00f]
[ 0.256221] pci 0000:04:00.0: reg 0x24: [mem 0xf7410000-0xf74101ff]
[ 0.256237] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.256301] pci 0000:04:00.0: PME# supported from D3hot
[ 0.256394] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.256397] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.256400] pci 0000:00:1c.3: bridge window [mem 0xf7400000-0xf74fffff]
[ 0.256468] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.256498] pci 0000:05:00.0: reg 0x10: [mem 0xf7300000-0xf7301fff 64bit]
[ 0.256633] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.256724] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.256729] pci 0000:00:1c.4: bridge window [mem 0xf7300000-0xf73fffff]
[ 0.256790] pci 0000:06:00.0: [1b21:1080] type 01 class 0x060401
[ 0.256959] pci 0000:00:1c.6: PCI bridge to [bus 06-07] (subtractive decode)
[ 0.256962] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
[ 0.256965] pci 0000:00:1c.6: bridge window [mem 0xf7200000-0xf72fffff]
[ 0.256971] pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.256971] pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.256972] pci 0000:00:1c.6: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.256973] pci 0000:00:1c.6: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.256974] pci 0000:00:1c.6: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.256975] pci 0000:00:1c.6: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.256976] pci 0000:00:1c.6: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.256976] pci 0000:00:1c.6: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.256977] pci 0000:00:1c.6: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.256978] pci 0000:00:1c.6: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[ 0.257010] pci_bus 0000:07: extended config space not accessible
[ 0.257036] pci 0000:07:01.0: [1033:0035] type 00 class 0x0c0310
[ 0.257065] pci 0000:07:01.0: reg 0x10: [mem 0xf7203000-0xf7203fff]
[ 0.257206] pci 0000:07:01.0: supports D1 D2
[ 0.257207] pci 0000:07:01.0: PME# supported from D0 D1 D2 D3hot
[ 0.257261] pci 0000:07:01.1: [1033:0035] type 00 class 0x0c0310
[ 0.257290] pci 0000:07:01.1: reg 0x10: [mem 0xf7202000-0xf7202fff]
[ 0.257431] pci 0000:07:01.1: supports D1 D2
[ 0.257432] pci 0000:07:01.1: PME# supported from D0 D1 D2 D3hot
[ 0.257486] pci 0000:07:01.2: [1033:00e0] type 00 class 0x0c0320
[ 0.257515] pci 0000:07:01.2: reg 0x10: [mem 0xf7201000-0xf72010ff]
[ 0.257656] pci 0000:07:01.2: supports D1 D2
[ 0.257657] pci 0000:07:01.2: PME# supported from D0 D1 D2 D3hot
[ 0.257724] pci 0000:07:03.0: [1106:3044] type 00 class 0x0c0010
[ 0.257754] pci 0000:07:03.0: reg 0x10: [mem 0xf7200000-0xf72007ff]
[ 0.257771] pci 0000:07:03.0: reg 0x14: [io 0xc000-0xc07f]
[ 0.257902] pci 0000:07:03.0: supports D2
[ 0.257902] pci 0000:07:03.0: PME# supported from D2 D3hot D3cold
[ 0.258005] pci 0000:06:00.0: PCI bridge to [bus 07] (subtractive decode)
[ 0.258014] pci 0000:06:00.0: bridge window [io 0xc000-0xcfff]
[ 0.258019] pci 0000:06:00.0: bridge window [mem 0xf7200000-0xf72fffff]
[ 0.258028] pci 0000:06:00.0: bridge window [io 0xc000-0xcfff] (subtractive decode)
[ 0.258029] pci 0000:06:00.0: bridge window [mem 0xf7200000-0xf72fffff] (subtractive decode)
[ 0.258030] pci 0000:06:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.258030] pci 0000:06:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.258031] pci 0000:06:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.258032] pci 0000:06:00.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.258033] pci 0000:06:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.258034] pci 0000:06:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.258035] pci 0000:06:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.258035] pci 0000:06:00.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.258036] pci 0000:06:00.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.258037] pci 0000:06:00.0: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[ 0.258108] pci 0000:08:00.0: [1b4b:9172] type 00 class 0x010601
[ 0.258129] pci 0000:08:00.0: reg 0x10: [io 0xb040-0xb047]
[ 0.258141] pci 0000:08:00.0: reg 0x14: [io 0xb030-0xb033]
[ 0.258152] pci 0000:08:00.0: reg 0x18: [io 0xb020-0xb027]
[ 0.258164] pci 0000:08:00.0: reg 0x1c: [io 0xb010-0xb013]
[ 0.258176] pci 0000:08:00.0: reg 0x20: [io 0xb000-0xb00f]
[ 0.258188] pci 0000:08:00.0: reg 0x24: [mem 0xf7110000-0xf71101ff]
[ 0.258199] pci 0000:08:00.0: reg 0x30: [mem 0xf7100000-0xf710ffff pref]
[ 0.258216] pci 0000:08:00.0: Enabling fixed DMA alias to 00.1
[ 0.258263] pci 0000:08:00.0: PME# supported from D3hot
[ 0.258345] pci 0000:00:1c.7: PCI bridge to [bus 08]
[ 0.258348] pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff]
[ 0.258352] pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.258966] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.259028] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.259090] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.259151] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.259212] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.259273] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.259333] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.259393] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.259645] ACPI: EC: interrupt unblocked
[ 0.259652] ACPI: EC: event unblocked
[ 0.259658] ACPI: \SB.PCI0.LPCB.EC0_: GPE=0x18, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.259659] ACPI: \SB.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[ 0.259721] iommu: Default domain type: Passthrough
[ 0.259721] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.259721] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.259721] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.259721] vgaarb: loaded
[ 0.259721] SCSI subsystem initialized
[ 0.259721] libata version 3.00 loaded.
[ 0.259721] pps_core: LinuxPPS API ver. 1 registered
[ 0.259721] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.259721] PTP clock support registered
[ 0.259721] EDAC MC: Ver: 3.0.0
[ 0.259721] PCI: Using ACPI for IRQ routing
[ 0.259721] PCI: pci_cache_line_size set to 64 bytes
[ 0.259721] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[ 0.259721] e820: reserve RAM buffer [mem 0xdeb90000-0xdfffffff]
[ 0.259721] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[ 0.259721] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[ 0.260178] NetLabel: Initializing
[ 0.260178] NetLabel: domain hash size = 128
[ 0.260179] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.260191] NetLabel: unlabeled traffic allowed by default
[ 0.260203] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.260205] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.262223] clocksource: Switched to clocksource tsc-early
[ 0.269451] VFS: Disk quotas dquot_6.6.0
[ 0.269464] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.269542] AppArmor: AppArmor Filesystem Enabled
[ 0.269555] pnp: PnP ACPI init
[ 0.269656] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.269661] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.269744] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.269746] system 00:01: [io 0x0200-0x020f] has been reserved
[ 0.269747] system 00:01: [io 0xffff] has been reserved
[ 0.269748] system 00:01: [io 0xffff] has been reserved
[ 0.269749] system 00:01: [io 0x0400-0x0453] has been reserved
[ 0.269750] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.269751] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.269752] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.269756] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.269776] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.269827] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.269830] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.269925] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.269928] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.269980] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.269983] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.270230] pnp 00:06: [dma 0 disabled]
[ 0.270268] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.270513] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.270514] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.270515] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.270516] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.270517] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.270518] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.270519] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.270520] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.270521] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.270522] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.270523] system 00:07: [mem 0xf2000000-0xf2000fff] has been reserved
[ 0.270526] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.270667] pnp: PnP ACPI: found 8 devices
[ 0.276065] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.276091] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.276093] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.276094] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[ 0.276104] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf2100000-0xf22fffff]
[ 0.276109] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf2300000-0xf24fffff 64bit pref]
[ 0.276110] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.276112] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.276114] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.276116] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.276117] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.276120] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.276122] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.276126] pci 0000:00:1c.0: bridge window [mem 0xf2100000-0xf22fffff]
[ 0.276129] pci 0000:00:1c.0: bridge window [mem 0xf2300000-0xf24fffff 64bit pref]
[ 0.276134] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.276141] pci 0000:00:1c.1: bridge window [mem 0xf7500000-0xf75fffff]
[ 0.276149] pci 0000:04:00.0: BAR 6: assigned [mem 0xf7400000-0xf740ffff pref]
[ 0.276150] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.276153] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.276157] pci 0000:00:1c.3: bridge window [mem 0xf7400000-0xf74fffff]
[ 0.276164] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.276168] pci 0000:00:1c.4: bridge window [mem 0xf7300000-0xf73fffff]
[ 0.276176] pci 0000:06:00.0: PCI bridge to [bus 07]
[ 0.276179] pci 0000:06:00.0: bridge window [io 0xc000-0xcfff]
[ 0.276186] pci 0000:06:00.0: bridge window [mem 0xf7200000-0xf72fffff]
[ 0.276199] pci 0000:00:1c.6: PCI bridge to [bus 06-07]
[ 0.276201] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
[ 0.276205] pci 0000:00:1c.6: bridge window [mem 0xf7200000-0xf72fffff]
[ 0.276212] pci 0000:00:1c.7: PCI bridge to [bus 08]
[ 0.276215] pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff]
[ 0.276219] pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.276226] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.276227] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.276228] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.276229] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.276230] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.276231] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.276232] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.276232] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.276233] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.276234] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
[ 0.276235] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.276236] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.276236] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.276237] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.276238] pci_bus 0000:02: resource 1 [mem 0xf2100000-0xf22fffff]
[ 0.276239] pci_bus 0000:02: resource 2 [mem 0xf2300000-0xf24fffff 64bit pref]
[ 0.276240] pci_bus 0000:03: resource 1 [mem 0xf7500000-0xf75fffff]
[ 0.276241] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.276242] pci_bus 0000:04: resource 1 [mem 0xf7400000-0xf74fffff]
[ 0.276242] pci_bus 0000:05: resource 1 [mem 0xf7300000-0xf73fffff]
[ 0.276243] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
[ 0.276244] pci_bus 0000:06: resource 1 [mem 0xf7200000-0xf72fffff]
[ 0.276245] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window]
[ 0.276246] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window]
[ 0.276246] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.276247] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.276248] pci_bus 0000:06: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.276249] pci_bus 0000:06: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.276250] pci_bus 0000:06: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.276250] pci_bus 0000:06: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.276251] pci_bus 0000:06: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.276252] pci_bus 0000:06: resource 13 [mem 0xe0000000-0xfeafffff window]
[ 0.276253] pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
[ 0.276254] pci_bus 0000:07: resource 1 [mem 0xf7200000-0xf72fffff]
[ 0.276254] pci_bus 0000:07: resource 4 [io 0xc000-0xcfff]
[ 0.276255] pci_bus 0000:07: resource 5 [mem 0xf7200000-0xf72fffff]
[ 0.276256] pci_bus 0000:07: resource 6 [io 0x0000-0x0cf7 window]
[ 0.276257] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window]
[ 0.276257] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.276258] pci_bus 0000:07: resource 9 [mem 0x000d0000-0x000d3fff window]
[ 0.276259] pci_bus 0000:07: resource 10 [mem 0x000d4000-0x000d7fff window]
[ 0.276260] pci_bus 0000:07: resource 11 [mem 0x000d8000-0x000dbfff window]
[ 0.276261] pci_bus 0000:07: resource 12 [mem 0x000dc000-0x000dffff window]
[ 0.276261] pci_bus 0000:07: resource 13 [mem 0x000e0000-0x000e3fff window]
[ 0.276262] pci_bus 0000:07: resource 14 [mem 0x000e4000-0x000e7fff window]
[ 0.276263] pci_bus 0000:07: resource 15 [mem 0xe0000000-0xfeafffff window]
[ 0.276264] pci_bus 0000:08: resource 0 [io 0xb000-0xbfff]
[ 0.276265] pci_bus 0000:08: resource 1 [mem 0xf7100000-0xf71fffff]
[ 0.276365] NET: Registered protocol family 2
[ 0.276456] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.276467] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.276535] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.276631] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.276651] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.276666] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.276722] NET: Registered protocol family 1
[ 0.276726] NET: Registered protocol family 44
[ 0.408215] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x645 took 128393 usecs
[ 0.540206] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x645 took 128877 usecs
[ 0.540224] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.540234] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.540922] PCI: CLS 64 bytes, default 64
[ 0.540949] Trying to unpack rootfs image as initramfs...
[ 1.286809] Freeing initrd memory: 11580K
[ 1.286816] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.286818] software IO TLB: mapped [mem 0xdab90000-0xdeb90000] (64MB)
[ 1.286908] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[ 1.286908] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 1.286909] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 1.287020] check: Scanning for low memory corruption every 60 seconds
[ 1.287341] Initialise system trusted keyrings
[ 1.287348] Key type blacklist registered
[ 1.287380] workingset: timestamp_bits=37 max_order=21 bucket_order=0
[ 1.288366] zbud: loaded
[ 1.288639] Platform Keyring initialized
[ 1.292649] Key type asymmetric registered
[ 1.292650] Asymmetric key parser 'x509' registered
[ 1.292656] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.292682] io scheduler mq-deadline registered
[ 1.292683] io scheduler kyber registered
[ 1.292700] io scheduler bfq registered
[ 1.293485] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.293503] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 1.293503] vesafb: scrolling: redraw
[ 1.293504] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.293512] vesafb: framebuffer at 0xf1000000, mapped to 0x(ptrval), using 1216k, total 1216k
[ 1.293566] Console: switching to colour frame buffer device 80x30
[ 1.305829] fb0: VESA VGA frame buffer device
[ 1.305839] intel_idle: MWAIT substates: 0x1120
[ 1.305840] intel_idle: v0.4.1 model 0x2A
[ 1.305946] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.306188] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.326665] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.327693] Non-volatile memory driver v1.3
[ 1.327707] Linux agpgart interface v0.103
[ 1.328103] ahci 0000:00:1f.2: version 3.0
[ 1.340168] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.340170] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 1.400738] scsi host0: ahci
[ 1.400983] scsi host1: ahci
[ 1.401192] scsi host2: ahci
[ 1.401335] scsi host3: ahci
[ 1.401409] scsi host4: ahci
[ 1.401499] scsi host5: ahci
[ 1.401538] ata1: SATA max UDMA/133 abar m2048@0xf7626000 port 0xf7626100 irq 31
[ 1.401540] ata2: SATA max UDMA/133 abar m2048@0xf7626000 port 0xf7626180 irq 31
[ 1.401542] ata3: SATA max UDMA/133 abar m2048@0xf7626000 port 0xf7626200 irq 31
[ 1.401544] ata4: SATA max UDMA/133 abar m2048@0xf7626000 port 0xf7626280 irq 31
[ 1.401545] ata5: SATA max UDMA/133 abar m2048@0xf7626000 port 0xf7626300 irq 31
[ 1.401547] ata6: SATA max UDMA/133 abar m2048@0xf7626000 port 0xf7626380 irq 31
[ 1.401694] ahci 0000:04:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.401695] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.401851] scsi host6: ahci
[ 1.401914] scsi host7: ahci
[ 1.401945] ata7: SATA max UDMA/133 abar m512@0xf7410000 port 0xf7410100 irq 19
[ 1.401948] ata8: SATA max UDMA/133 abar m512@0xf7410000 port 0xf7410180 irq 19
[ 1.402092] ahci 0000:08:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.402094] ahci 0000:08:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 1.402250] scsi host8: ahci
[ 1.402314] scsi host9: ahci
[ 1.402345] ata9: SATA max UDMA/133 abar m512@0xf7110000 port 0xf7110100 irq 32
[ 1.402348] ata10: SATA max UDMA/133 abar m512@0xf7110000 port 0xf7110180 irq 32
[ 1.402379] i8042: PNP: No PS/2 controller found.
[ 1.402379] i8042: Probing ports directly.
[ 1.404339] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.404343] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.404415] mousedev: PS/2 mouse device common for all mice
[ 1.404460] rtc_cmos 00:02: RTC can wake from S4
[ 1.404605] rtc_cmos 00:02: registered as rtc0
[ 1.404616] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.404624] intel_pstate: Intel P-state driver initializing
[ 1.404825] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.404838] hid: raw HID events driver (C) Jiri Kosina
[ 1.404933] drop_monitor: Initializing network drop monitor service
[ 1.405177] NET: Registered protocol family 10
[ 1.416743] Segment Routing with IPv6
[ 1.416988] mce: Unable to init MCE device (rc: -5)
[ 1.417765] RAS: Correctable Errors collector initialized.
[ 1.417833] microcode: sig=0x206a7, pf=0x2, revision=0x2f
[ 1.417905] microcode: Microcode Update Driver: v2.2.
[ 1.417910] IPI shorthand broadcast: enabled
[ 1.417918] sched_clock: Marking stable (1417493025, 147169)->(1521016897, -103376703)
[ 1.418133] registered taskstats version 1
[ 1.418136] Loading compiled-in X.509 certificates
[ 1.419800] Loaded X.509 cert 'Kernel OBS Project: 1fb41512acbc8eebdf828d877e4367bf6c719af3'
[ 1.419824] zswap: loaded using pool lzo/zbud
[ 1.419899] page_owner is disabled
[ 1.419945] Key type ._fscrypt registered
[ 1.419946] Key type .fscrypt registered
[ 1.424685] Key type big_key registered
[ 1.427684] Key type encrypted registered
[ 1.427688] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.427693] ima: No TPM chip found, activating TPM-bypass!
[ 1.427697] ima: Allocated hash algorithm: sha256
[ 1.427705] ima: No architecture policies found
[ 1.427711] evm: Initialising EVM extended attributes:
[ 1.427712] evm: security.selinux
[ 1.427713] evm: security.apparmor
[ 1.427713] evm: security.ima
[ 1.427714] evm: security.capability
[ 1.427715] evm: HMAC attrs: 0x1
[ 1.427972] PM: Magic number: 8:392:20
[ 1.428019] memory memory60: hash matches
[ 1.428081] rtc_cmos 00:02: setting system clock to 2020-02-20T09:00:37 UTC (1582189237)
[ 1.546986] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.546990] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.547024] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.547028] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.547051] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.547091] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.547093] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.547135] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.547138] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.547923] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT0._GTF.DSSP], AE_NOT_FOUND (20191018/psargs-330)
[ 1.549205] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT0._GTF due to previous error (AE_NOT_FOUND) (20191018/psparse-529)
[ 1.550458] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.550514] ata1.00: HPA detected: current 900193694, native 1000215216
[ 1.550738] ata1.00: NCQ Send/Recv Log not supported
[ 1.550741] ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM06B0Q, max UDMA/133
[ 1.550744] ata1.00: 900193694 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.551090] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT0._GTF.DSSP], AE_NOT_FOUND (20191018/psargs-330)
[ 1.552386] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT0._GTF due to previous error (AE_NOT_FOUND) (20191018/psparse-529)
[ 1.553704] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT2._GTF.DSSP], AE_NOT_FOUND (20191018/psargs-330)
[ 1.554986] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT2._GTF due to previous error (AE_NOT_FOUND) (20191018/psparse-529)
[ 1.556316] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20191018/psargs-330)
[ 1.557587] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT1._GTF due to previous error (AE_NOT_FOUND) (20191018/psparse-529)
[ 1.558827] ata2.00: ATAPI: HL-DT-ST BD-RE BH10LS38, 1.00, max UDMA/133
[ 1.558961] ata1.00: NCQ Send/Recv Log not supported
[ 1.558967] ata1.00: configured for UDMA/133
[ 1.558980] ata3.00: ATA-7: SAMSUNG HD502IJ, 1AA01118, max UDMA7
[ 1.558983] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.559313] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 6B0Q PQ: 0 ANSI: 5
[ 1.559902] ata1.00: Enabling discard_zeroes_data
[ 1.560367] sd 0:0:0:0: [sda] 900193694 512-byte logical blocks: (461 GB/429 GiB)
[ 1.560432] sd 0:0:0:0: [sda] Write Protect is off
[ 1.560435] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.560559] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.560866] ata1.00: Enabling discard_zeroes_data
[ 1.561365] sda: sda1 sda2
[ 1.561524] ata1.00: Enabling discard_zeroes_data
[ 1.561870] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.565506] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT2._GTF.DSSP], AE_NOT_FOUND (20191018/psargs-330)
[ 1.566097] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT2._GTF due to previous error (AE_NOT_FOUND) (20191018/psparse-529)
[ 1.566946] ata3.00: configured for UDMA/133
[ 1.567562] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20191018/psargs-330)
[ 1.568420] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT1._GTF due to previous error (AE_NOT_FOUND) (20191018/psparse-529)
[ 1.569252] ata2.00: configured for UDMA/133
[ 1.589003] scsi 1:0:0:0: CD-ROM HL-DT-ST BD-RE BH10LS38 1.00 PQ: 0 ANSI: 5
[ 1.623489] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1118 PQ: 0 ANSI: 5
[ 1.624262] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.624325] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.624329] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.624449] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.655933] sdb: sdb1
[ 1.656602] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.658705] Freeing unused decrypted memory: 2040K
[ 1.659240] Freeing unused kernel image (initmem) memory: 2152K
[ 1.668208] Write protecting the kernel read-only data: 20480k
[ 1.668954] Freeing unused kernel image (text/rodata gap) memory: 2044K
[ 1.669390] Freeing unused kernel image (rodata/data gap) memory: 1696K
[ 1.669457] Run /init as init process
[ 1.674357] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[ 1.701255] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid)
[ 1.720258] systemd[1]: Detected architecture x86-64.
[ 1.720265] systemd[1]: Running in initial RAM disk.
[ 1.720298] systemd[1]: Set hostname to <linux-giqf>.
[ 1.763509] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.763532] systemd[1]: Listening on udev Kernel Socket.
[ 1.763572] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.763600] systemd[1]: Listening on udev Control Socket.
[ 1.763609] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.763643] systemd[1]: Listening on Journal Socket.
[ 1.763658] systemd[1]: Reached target Swap.
[ 1.763684] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.763696] systemd[1]: Reached target Sockets.
[ 1.773449] alua: device handler registered
[ 1.774156] emc: device handler registered
[ 1.774939] rdac: device handler registered
[ 1.787857] device-mapper: uevent: version 1.0.3
[ 1.787896] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 1.791909] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.791926] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.791943] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.888043] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 1.888410] ACPI: Power Button [PWRB]
[ 1.888443] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.888777] ACPI: Power Button [PWRF]
[ 1.917239] ACPI: bus type USB registered
[ 1.917253] usbcore: registered new interface driver usbfs
[ 1.917257] usbcore: registered new interface driver hub
[ 1.917272] usbcore: registered new device driver usb
[ 1.921891] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.922579] ehci-pci: EHCI PCI platform driver
[ 1.922706] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.922711] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.922721] ehci-pci 0000:00:1a.0: debug port 2
[ 1.926555] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.926626] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.926637] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7628000
[ 1.931662] random: crng init done
[ 1.931664] random: 7 urandom warning(s) missed due to ratelimiting
[ 1.940864] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.940917] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[ 1.940918] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.940919] usb usb1: Product: EHCI Host Controller
[ 1.940920] usb usb1: Manufacturer: Linux 5.5.4-2.g813d10d-default ehci_hcd
[ 1.940921] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.941029] hub 1-0:1.0: USB hub found
[ 1.941035] hub 1-0:1.0: 2 ports detected
[ 1.941153] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.941159] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[ 1.941282] xhci_hcd 0000:03:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
[ 1.941509] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[ 1.941510] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.941511] usb usb2: Product: xHCI Host Controller
[ 1.941512] usb usb2: Manufacturer: Linux 5.5.4-2.g813d10d-default xhci-hcd
[ 1.941512] usb usb2: SerialNumber: 0000:03:00.0
[ 1.941607] hub 2-0:1.0: USB hub found
[ 1.941617] hub 2-0:1.0: 2 ports detected
[ 1.941715] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.941717] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[ 1.941719] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed
[ 1.946740] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.946756] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.05
[ 1.946757] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.946758] usb usb3: Product: xHCI Host Controller
[ 1.946759] usb usb3: Manufacturer: Linux 5.5.4-2.g813d10d-default xhci-hcd
[ 1.946759] usb usb3: SerialNumber: 0000:03:00.0
[ 1.946796] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.946830] hub 3-0:1.0: USB hub found
[ 1.946838] hub 3-0:1.0: 2 ports detected
[ 1.946997] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.947007] ehci-pci 0000:00:1d.0: debug port 2
[ 1.950921] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.950935] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7627000
[ 1.964152] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.964184] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[ 1.964185] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.964186] usb usb4: Product: EHCI Host Controller
[ 1.964187] usb usb4: Manufacturer: Linux 5.5.4-2.g813d10d-default ehci_hcd
[ 1.964187] usb usb4: SerialNumber: 0000:00:1d.0
[ 1.964303] hub 4-0:1.0: USB hub found
[ 1.964309] hub 4-0:1.0: 2 ports detected
[ 1.964397] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 1.964402] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 5
[ 1.964520] xhci_hcd 0000:05:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
[ 1.964726] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[ 1.964728] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.964729] usb usb5: Product: xHCI Host Controller
[ 1.964729] usb usb5: Manufacturer: Linux 5.5.4-2.g813d10d-default xhci-hcd
[ 1.964730] usb usb5: SerialNumber: 0000:05:00.0
[ 1.964788] hub 5-0:1.0: USB hub found
[ 1.964796] hub 5-0:1.0: 2 ports detected
[ 1.964892] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 1.964893] ehci-pci 0000:07:01.2: EHCI Host Controller
[ 1.964896] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 6
[ 1.964896] ehci-pci 0000:07:01.2: new USB bus registered, assigned bus number 7
[ 1.964899] xhci_hcd 0000:05:00.0: Host supports USB 3.0 SuperSpeed
[ 1.964982] ehci-pci 0000:07:01.2: irq 17, io mem 0xf7201000
[ 1.967973] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.967986] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.05
[ 1.967986] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.967987] usb usb6: Product: xHCI Host Controller
[ 1.967988] usb usb6: Manufacturer: Linux 5.5.4-2.g813d10d-default xhci-hcd
[ 1.967988] usb usb6: SerialNumber: 0000:05:00.0
[ 1.968042] hub 6-0:1.0: USB hub found
[ 1.968049] hub 6-0:1.0: 2 ports detected
[ 1.980147] ehci-pci 0000:07:01.2: USB 2.0 started, EHCI 1.00
[ 1.980186] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[ 1.980187] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.980188] usb usb7: Product: EHCI Host Controller
[ 1.980189] usb usb7: Manufacturer: Linux 5.5.4-2.g813d10d-default ehci_hcd
[ 1.980190] usb usb7: SerialNumber: 0000:07:01.2
[ 1.980343] hub 7-0:1.0: USB hub found
[ 1.980350] hub 7-0:1.0: 5 ports detected
[ 1.981344] ohci-pci: OHCI PCI platform driver
[ 1.981449] ohci-pci 0000:07:01.0: OHCI PCI host controller
[ 1.981452] ohci-pci 0000:07:01.0: new USB bus registered, assigned bus number 8
[ 1.981469] ohci-pci 0000:07:01.0: irq 19, io mem 0xf7203000
[ 1.997450] sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.997454] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.008220] firewire_ohci 0000:07:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 2.020524] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.070055] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.05
[ 2.070057] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.070058] usb usb8: Product: OHCI PCI host controller
[ 2.070059] usb usb8: Manufacturer: Linux 5.5.4-2.g813d10d-default ohci_hcd
[ 2.070060] usb usb8: SerialNumber: 0000:07:01.0
[ 2.070202] hub 8-0:1.0: USB hub found
[ 2.070213] hub 8-0:1.0: 3 ports detected
[ 2.070414] ohci-pci 0000:07:01.1: OHCI PCI host controller
[ 2.070417] ohci-pci 0000:07:01.1: new USB bus registered, assigned bus number 9
[ 2.070436] ohci-pci 0000:07:01.1: irq 16, io mem 0xf7202000
[ 2.092201] tsc: Refined TSC clocksource calibration: 3399.621 MHz
[ 2.092208] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3100e91704b, max_idle_ns: 440795337747 ns
[ 2.092243] clocksource: Switched to clocksource tsc
[ 2.158023] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.05
[ 2.158025] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.158025] usb usb9: Product: OHCI PCI host controller
[ 2.158026] usb usb9: Manufacturer: Linux 5.5.4-2.g813d10d-default ohci_hcd
[ 2.158027] usb usb9: SerialNumber: 0000:07:01.1
[ 2.158148] hub 9-0:1.0: USB hub found
[ 2.158156] hub 9-0:1.0: 2 ports detected
[ 2.280192] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.300194] usb 5-2: new full-speed USB device number 2 using xhci_hcd
[ 2.304159] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 2.308723] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 2.308726] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.308966] hub 1-1:1.0: USB hub found
[ 2.309051] hub 1-1:1.0: 6 ports detected
[ 2.336716] usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 2.336719] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.337005] hub 4-1:1.0: USB hub found
[ 2.337085] hub 4-1:1.0: 8 ports detected
[ 2.409219] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.487041] usb 5-2: New USB device found, idVendor=0c4b, idProduct=0501, bcdDevice= 0.01
[ 2.487044] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.487046] usb 5-2: Product: cyberJack RFID komfort
[ 2.487047] usb 5-2: Manufacturer: REINER SCT
[ 2.487048] usb 5-2: SerialNumber: 2387721424
[ 2.540333] firewire_core 0000:07:03.0: created device fw0: GUID 001fc60000104982, S400
[ 2.576820] systemd-journald[250]: Received SIGTERM from PID 1 (systemd).
[ 2.593048] printk: systemd: 20 output lines suppressed due to ratelimiting
[ 2.624172] usb 4-1.1: new low-speed USB device number 3 using ehci-pci
[ 2.659381] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[ 2.743323] usb 4-1.1: New USB device found, idVendor=046a, idProduct=0023, bcdDevice= 2.20
[ 2.743324] usb 4-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.808257] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr
[ 2.824178] usb 4-1.2: new low-speed USB device number 4 using ehci-pci
[ 2.826019] systemd-journald[471]: Received request to flush runtime journal from PID 1
[ 2.858534] audit: type=1400 audit(1582185638.924:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ping" pid=503 comm="apparmor_parser"
[ 2.868092] audit: type=1400 audit(1582185638.932:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ghostscript" pid=512 comm="apparmor_parser"
[ 2.868094] audit: type=1400 audit(1582185638.932:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ghostscript///usr/bin/hpijs" pid=512 comm="apparmor_parser"
[ 2.875316] audit: type=1400 audit(1582185638.940:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="klogd" pid=519 comm="apparmor_parser"
[ 2.886352] audit: type=1400 audit(1582185638.952:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="syslogd" pid=546 comm="apparmor_parser"
[ 2.898908] audit: type=1400 audit(1582185638.964:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="syslog-ng" pid=553 comm="apparmor_parser"
[ 2.918995] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.918997] ACPI: Thermal Zone [TZ00] (28 C)
[ 2.919212] thermal LNXTHERM:01: registered as thermal_zone1
[ 2.919213] ACPI: Thermal Zone [TZ01] (30 C)
[ 2.920933] audit: type=1400 audit(1582185638.988:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lessopen.sh" pid=559 comm="apparmor_parser"
[ 2.938717] usb 4-1.2: New USB device found, idVendor=046d, idProduct=c050, bcdDevice=27.20
[ 2.938719] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.938720] usb 4-1.2: Product: USB-PS/2 Optical Mouse
[ 2.938720] usb 4-1.2: Manufacturer: Logitech
[ 2.941383] audit: type=1400 audit(1582185639.008:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/apache2/mpm-prefork/apache2" pid=565 comm="apparmor_parser"
[ 2.941384] audit: type=1400 audit(1582185639.008:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=565 comm="apparmor_parser"
[ 2.959007] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 2.959008] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 2.959154] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 2.961348] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20191018/utaddress-204)
[ 2.961352] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.961354] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20191018/utaddress-204)
[ 2.961356] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20191018/utaddress-204)
[ 2.961357] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.961358] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20191018/utaddress-204)
[ 2.961359] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20191018/utaddress-204)
[ 2.961360] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.961361] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20191018/utaddress-204)
[ 2.961362] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20191018/utaddress-204)
[ 2.961363] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.961364] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.962842] IPMI message handler: version 39.2
[ 2.969648] ipmi device interface
[ 2.978787] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 2.985120] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 2.986359] usbcore: registered new interface driver usbhid
[ 2.986360] usbhid: USB HID core driver
[ 3.016146] usb 4-1.7: new full-speed USB device number 5 using ehci-pci
[ 3.048998] cryptd: max_cpu_qlen set to 1000
[ 3.070703] asus_wmi: ASUS WMI generic driver loaded
[ 3.071710] asus_wmi: Initialization: 0x0
[ 3.071735] asus_wmi: BIOS WMI version: 0.9
[ 3.071776] asus_wmi: SFUN value: 0x0
[ 3.071778] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
[ 3.072112] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input6
[ 3.078307] AVX version of gcm_enc/dec engaged.
[ 3.078308] AES CTR mode by8 optimization enabled
[ 3.078781] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 3.078784] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 3.084616] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 3.128789] usb 4-1.7: New USB device found, idVendor=0cf3, idProduct=3000, bcdDevice= 2.00
[ 3.128791] usb 4-1.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.162035] nvidia: loading out-of-tree module taints kernel.
[ 3.162041] nvidia: module license 'NVIDIA' taints kernel.
[ 3.162041] Disabling lock debugging due to kernel taint
[ 3.178306] iTCO_vendor_support: vendor-support=0
[ 3.178764] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.0/0003:046D:C050.0003/input/input7
[ 3.180260] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 3.180291] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 3.180337] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 3.180546] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.181122] hid-generic 0003:046D:C050.0003: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.2/input0
[ 3.182001] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.0/0003:046A:0023.0001/input/input8
[ 3.186656] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f4:6d:04:21:b8:bb
[ 3.186657] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 3.186705] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 3.187340] nvidia-nvlink: Nvlink Core is being initialized, major device number 239
[ 3.192891] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=nonewns=io+mem
[ 3.232191] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered,acl,user_xattr
[ 3.240289] cherry 0003:046A:0023.0001: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1d.0-1.1/input0
[ 3.240424] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.1/0003:046A:0023.0002/input/input9
[ 3.292296] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 440.59 Thu Jan 30 01:00:41 UTC 2020
[ 3.300343] cherry 0003:046A:0023.0002: input,hidraw2: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1d.0-1.1/input1
[ 3.333671] Bluetooth: Core ver 2.22
[ 3.333682] NET: Registered protocol family 31
[ 3.333682] Bluetooth: HCI device and connection manager initialized
[ 3.333861] Bluetooth: HCI socket layer initialized
[ 3.333862] Bluetooth: L2CAP socket layer initialized
[ 3.333865] Bluetooth: SCO socket layer initialized
[ 3.335779] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 440.59 Thu Jan 30 00:59:18 UTC 2020
[ 3.346497] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 3.346499] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[ 3.351460] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.572421] kvm: disabled by bios
[ 3.588023] usbcore: registered new interface driver ath3k
[ 3.625044] kvm: disabled by bios
[ 3.689189] kvm: disabled by bios
[ 3.691893] intel_rapl_common: Found RAPL domain package
[ 3.691895] intel_rapl_common: Found RAPL domain core
[ 3.691900] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[ 3.749216] kvm: disabled by bios
[ 3.749810] usb 4-1.7: USB disconnect, device number 5
[ 4.769231] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[ 4.769402] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ 4.769513] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 4.769613] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 4.769715] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 4.769791] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 4.769864] input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 4.996150] usb 4-1.7: new full-speed USB device number 6 using ehci-pci
[ 5.105153] usb 4-1.7: New USB device found, idVendor=0b05, idProduct=179c, bcdDevice= 0.01
[ 5.105155] usb 4-1.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.117813] usbcore: registered new interface driver btusb
[ 5.456869] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.456870] Bluetooth: BNEP filters: protocol multicast
[ 5.456873] Bluetooth: BNEP socket layer initialized
[ 6.108166] snd_hda_intel 0000:00:1b.0: azx_get_response timeout, switching to polling mode: last cmd=0x300f0000
[ 6.554126] bpfilter: Loaded bpfilter_umh pid 1074
[ 6.566573] No iBFT detected.
[ 7.116156] snd_hda_intel 0000:00:1b.0: No response from codec, disabling MSI: last cmd=0x300f0000
[ 8.120165] snd_hda_intel 0000:00:1b.0: Codec #3 probe error; disabling it...
[ 8.148667] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 8.148668] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.148669] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 8.148670] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 8.148670] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
[ 8.148671] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 8.148672] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 8.148673] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 8.148673] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 12.497990] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 12.498040] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 12.700369] NET: Registered protocol family 17
[ 16.040220] Loading iSCSI transport class v2.0-870.
[ 16.750734] pmd_set_huge: Cannot satisfy [mem 0xf6000000-0xf6200000] with a huge-page mapping due to MTRR override.
[ 16.772212] resource sanity check: requesting [mem 0x000e0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000e0000-0x000e3fff window]
[ 16.772365] caller _nv030926rm+0x58/0x90 [nvidia] mapping multiple BARs
[ 16.943302] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[ 16.943446] caller _nv000908rm+0x1bf/0x1f0 [nvidia] mapping multiple BARs
[ 29.368086] fuse: init (API version 7.31)
[ 30.600699] Bluetooth: RFCOMM TTY layer initialized
[ 30.600704] Bluetooth: RFCOMM socket layer initialized
[ 30.600707] Bluetooth: RFCOMM ver 1.11
friedrich@linux-giqf:~>

Kernel Parameter:

apm=off acpi=force mce=off barrier=off ide=nodma idewait=50 i8042.nomux psmouse.proto=bare irqpoll pci=nommconf splash=silent quiet showopts

MfG

 

[fixedwater]

Wäre besser, wenn Du das wie von mir geschrieben im Linux-Unterforum postest... Da gehöt es nämlich hin. Und es gibt auch die Möglichkeit eine Datei anzuhängen... oder aber nur die Fehlermeldungen posten, die markiert dmesg nämlich rot...