Leserartikel HTPC How-To (Linux XBMC + LiveTV Intel ink HD Beschl.)

CvH · 18. Dezember 2014

bzw Krautmaster, hast du auch Bilder vom Ember Media dingens die nicht mit Win3.1 gemacht wurden

alternativ gibt es noch MediaElch und tinyMediaManager, die gehen auch gut. Evtl könnte man bei den Verzeichnisstruckturen noch paar alternativen beifügen was auch noch alles geht.

Ich hab z.B. , da gibt s ja bestimmt noch einiges anderes was auch problemlos geht.
Anhang anzeigen 460690

Ergänzung (18. Dezember 2014)

Alles auf Kodi umgestellt + fehlende Screenshots eingefügt (mal durchgucken bitte wegenm fehlern)
http://abload.de/img/zazzazazaftu9b.jpg

Entwurf #2: http://pastebin.com/yQvdpSB6

Nafi · 18. Dezember 2014

man könnte noch einbauen wie man Picons ins Livetv reinbekommt.

Kennt jemand ne gute picon Quelle?

_nico · 18. Dezember 2014

Nafi schrieb:
man könnte noch einbauen wie man Picons ins Livetv reinbekommt.

Kennt jemand ne gute picon Quelle?

Jo, hier.

Code:

curl -L "http://github.com/3PO/Senderlogos/archive/master.zip" > channellogos.zip
unzip channellogos.zip -d ~/.xbmc/userdata/
NUR BEIM AKTUALISEREN rm -Rf ~/.xbmc/userdata/channellogos
mv ~/.xbmc/userdata/Senderlogos-master ~/.xbmc/userdata/channellogos
rm channellogos.zip

Dann halt noch den Ordner in den Kodi LiveTV-Einstellungen einstellen, ggf. versteckte Ordner anzeigen lassen.

Gruß

CvH · 18. Dezember 2014

_nico schrieb:
Jo, hier.

das sind aber keine Picons

https://tvheadend.org/boards/5/topics/13408?r=13674#message-13674
klappen gut (wenn man es halt braucht, für xbmc reichen doch die normalen Logos eigentlich aus ? oder ?)

Nafi · 18. Dezember 2014

klappen gut (wenn man es halt braucht, für xbmc reichen doch die normalen Logos eigentlich aus ? oder ?)

klar, hauptsache Bildchen

CvH · 18. Dezember 2014

Nafi schrieb:
klar, hauptsache Bildchen

Die bei Kodi im Skin angezeigt werden sind keine Picons (maximal als fallback), die braucht man eigentlich nur für die Web Anbindung, oder?

Picons haben auch eine viel zu kleine Auflösung für den Kodi Skin.

Nafi · 18. Dezember 2014

hä?

wo genau ist der Unterschied zwischen Bild und Picon?

Man muss doch einen Ordner haben wo die Bilder liegen oder hat kodi die neuerdings automatisch?
Deswegen hab ich gefragt ob jemand ne gute Quelle für Bildchen kennt

CvH · 18. Dezember 2014

Die Logos haben eine höhere Auflösung und werden soweit ich weiß nur von Kodi/XBMC benutzt, die Picons werden von den Weboberflächen und bei VDR selbst benutzt. Logo = große Auflösung , Picons = kleine Auflösung.

fwberni · 26. Dezember 2014

hi,

habe etwas Probleme mit meinen VDR-Server und Clienten.
VDR-Server: Ubuntu Linux vdr01 3.13.0-43-generic #72-Ubuntu SMP Mon Dec 8 19:35:06 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
Ver. 2.1.6 mit dvbapi, vnsiserver, streamdev-server +oscam kompiliert + 2 TV Karten SkyDVB/950 u. 960.
Client: Openelec stable Version mit vnsi-client.

habe das Problem das VNSI sehr oft Trigger EPG-Update macht. Wenn dies der Fall ist und ich gerade umschalten möchte geht der Sender nicht.

hier mal ein Auszug aus dem Syslog:

Dec 26 12:15:45 vdr01 vdr: [9561] VNSI: exit streamer thread
Dec 26 12:15:45 vdr01 vdr: [9561] cLiveStreamer stream processor thread ended (pid=9022, tid=9561)
Dec 26 12:15:45 vdr01 vdr: [9422] VNSI: LiveStreamer::Close - close
Dec 26 12:15:45 vdr01 vdr: [9422] VNSI: close video input ...
Dec 26 12:15:45 vdr01 vdr: [9422] VNSI: call retune ...
Dec 26 12:15:45 vdr01 vdr: [9422] DVBAPI: 0.0 set CAM decrypt (SID 61300 (0xEF74), caLm 5, HasCaDescriptors 0)
Dec 26 12:15:45 vdr01 vdr: [9422] CAM 2: unassigned
Dec 26 12:15:45 vdr01 vdr: [9422] VNSI: call retune ...
Dec 26 12:15:45 vdr01 vdr: [9422] VNSI: close video input ...
Dec 26 12:15:56 vdr01 vdr: [9684] VDR version 2.1.6 started
Dec 26 12:15:56 vdr01 vdr: [9684] switched to user 'vdruser'
Dec 26 12:15:56 vdr01 vdr: [9684] codeset is 'UTF-8' - known
Dec 26 12:15:56 vdr01 vdr: [9684] found 28 locales in /usr/local/share/locale
Dec 26 12:15:56 vdr01 vdr: [9684] loading plugin: /usr/local/lib/vdr/libvdr-streamdev-server.so.2.1.6
Dec 26 12:15:56 vdr01 vdr: [9684] loading plugin: /usr/local/lib/vdr/libvdr-dvbapi.so.2.1.6
Dec 26 12:15:56 vdr01 vdr: [9684] loading plugin: /usr/local/lib/vdr/libvdr-vnsiserver.so.2.1.6
Dec 26 12:15:56 vdr01 vdr: [9684] loading /var/lib/vdr/setup.conf
Dec 26 12:15:56 vdr01 vdr: [9684] loading /var/lib/vdr/sources.conf
Dec 26 12:15:56 vdr01 vdr: [9684] loading /var/lib/vdr/diseqc.conf
Dec 26 12:15:56 vdr01 vdr: [9684] loading /var/lib/vdr/scr.conf
Dec 26 12:15:56 vdr01 vdr: [9684] loading /var/lib/vdr/channels.conf
Dec 26 12:15:56 vdr01 vdr: [9684] loading /var/lib/vdr/timers.conf
Dec 26 12:15:56 vdr01 vdr: [9684] loading /var/lib/vdr/svdrphosts.conf
Dec 26 12:15:56 vdr01 vdr: [9684] loading /var/lib/vdr/keymacros.conf
Dec 26 12:15:56 vdr01 vdr: [9684] registered source parameters for 'A - ATSC'
Dec 26 12:15:56 vdr01 vdr: [9684] registered source parameters for 'C - DVB-C'
Dec 26 12:15:56 vdr01 vdr: [9684] registered source parameters for 'S - DVB-S'
Dec 26 12:15:56 vdr01 vdr: [9684] registered source parameters for 'T - DVB-T'
Dec 26 12:15:56 vdr01 vdr: [9685] video directory scanner thread started (pid=9684, tid=9685, prio=high)
Dec 26 12:15:56 vdr01 vdr: [9686] video directory scanner thread started (pid=9684, tid=9686, prio=high)
Dec 26 12:15:56 vdr01 vdr: [9687] epg data reader thread started (pid=9684, tid=9687, prio=high)
Dec 26 12:15:56 vdr01 vdr: [9687] reading EPG data from /var/cache/vdr/epg.data
Dec 26 12:15:56 vdr01 vdr: [9684] probing /dev/dvb/adapter0/frontend0
Dec 26 12:15:56 vdr01 vdr: [9684] creating cDvbDevice
Dec 26 12:15:56 vdr01 vdr: [9686] video directory scanner thread ended (pid=9684, tid=9686)
Dec 26 12:15:56 vdr01 vdr: [9684] new device number 1
Dec 26 12:15:56 vdr01 vdr: [9685] video directory scanner thread ended (pid=9684, tid=9685)
Dec 26 12:15:56 vdr01 vdr: [9684] DVB API version is 0x050A (VDR was built with 0x050A)
Dec 26 12:15:56 vdr01 vdr: [9684] frontend 0/0 provides DVB-S,DVB-S2 with QPSK ("Montage DS3103/TS2022")
Dec 26 12:15:56 vdr01 vdr: [9684] cTimeMs: using monotonic clock (resolution is 1 ns)
Dec 26 12:15:56 vdr01 vdr: [9689] tuner on frontend 0/0 thread started (pid=9684, tid=9689, prio=high)
Dec 26 12:15:56 vdr01 vdr: [9690] section handler thread started (pid=9684, tid=9690, prio=low)
Dec 26 12:15:56 vdr01 vdr: [9684] probing /dev/dvb/adapter1/frontend0
Dec 26 12:15:56 vdr01 vdr: [9684] creating cDvbDevice
Dec 26 12:15:56 vdr01 vdr: [9684] new device number 2
Dec 26 12:15:56 vdr01 vdr: [9692] CI adapter on device 1 thread started (pid=9684, tid=9692, prio=high)
Dec 26 12:15:56 vdr01 vdr: [9684] frontend 1/0 provides DVB-S,DVB-S2 with QPSK ("Montage DS3103/TS2022")
Dec 26 12:15:56 vdr01 vdr: [9684] found 2 DVB devices
Dec 26 12:15:56 vdr01 vdr: [9693] tuner on frontend 1/0 thread started (pid=9684, tid=9693, prio=high)
Dec 26 12:15:56 vdr01 vdr: [9684] initializing plugin: streamdev-server (0.6.1-git): VDR Streaming Server
Dec 26 12:15:56 vdr01 vdr: [9684] initializing plugin: dvbapi (2.1.1-GIT-36a6b1d): SoftCAM für OSCam
Dec 26 12:15:56 vdr01 vdr: [9684] initializing plugin: vnsiserver (1.2.0): VDR-Network-Streaming-Interface (VNSI) Server
Dec 26 12:15:56 vdr01 vdr: [9684] setting primary device to 1
Dec 26 12:15:56 vdr01 vdr: [9684] device 1 has no MPEG decoder
Dec 26 12:15:56 vdr01 vdr: [9684] assuming manual start of VDR
Dec 26 12:15:56 vdr01 vdr: [9684] SVDRP listening on port 6419
Dec 26 12:15:56 vdr01 vdr: [9684] setting current skin to "sttng"
Dec 26 12:15:56 vdr01 vdr: [9684] loading /var/lib/vdr/themes/sttng-default.theme
Dec 26 12:15:56 vdr01 vdr: [9684] starting plugin: streamdev-server
Dec 26 12:15:56 vdr01 vdr: [9684] loading /var/lib/vdr/plugins/streamdev-server/streamdevhosts.conf
Dec 26 12:15:56 vdr01 vdr: [9694] section handler thread started (pid=9684, tid=9694, prio=low)
Dec 26 12:15:56 vdr01 vdr: [9684] starting plugin: dvbapi
Dec 26 12:15:56 vdr01 vdr: [9684] DVBAPI: plugin version 2.1.1-GIT-36a6b1d initializing (VDR 2.1.6)
Dec 26 12:15:56 vdr01 vdr: [9695] streamdev server thread started (pid=9684, tid=9695, prio=high)
Dec 26 12:15:56 vdr01 vdr: [9684] DVBAPI: decryption library: FFdecsa
Dec 26 12:15:56 vdr01 vdr: [9695] Streamdev: Listening (VTP) on port 2004
Dec 26 12:15:56 vdr01 vdr: [9684] DVBAPI: Creating sCCIAdapter for device 0
Dec 26 12:15:56 vdr01 vdr: [9695] Streamdev: Listening (HTTP) on port 3000
Dec 26 12:15:56 vdr01 vdr: [9696] Socket Handler thread started (pid=9684, tid=9696, prio=high)
Dec 26 12:15:56 vdr01 vdr: [9684] DVBAPI: Creating sCCIAdapter for device 1
Dec 26 12:15:56 vdr01 vdr: [9684] DVBAPI: plugin started
Dec 26 12:15:56 vdr01 vdr: [9684] starting plugin: vnsiserver
Dec 26 12:15:56 vdr01 vdr: [9684] VNSI: VNSI Server started
Dec 26 12:15:56 vdr01 vdr: [9684] VNSI: Channel streaming timeout: 10 seconds
Dec 26 12:15:56 vdr01 vdr: [9698] SC-CI adapter on device 1 thread started (pid=9684, tid=9698, prio=high)
Dec 26 12:15:56 vdr01 vdr: [9699] VDR VNSI Server thread started (pid=9684, tid=9699, prio=high)
Dec 26 12:15:56 vdr01 vdr: [9697] SC-CI adapter on device 0 thread started (pid=9684, tid=9697, prio=high)
Dec 26 12:15:56 vdr01 vdr: [9699] loading /var/lib/vdr/plugins/vnsiserver/allowed_hosts.conf
Dec 26 12:15:56 vdr01 vdr: [9699] VNSI: Client with ID 0 connected: 192.168.178.33:39710
Dec 26 12:15:56 vdr01 vdr: [9702] VNSI: Welcome client 'XBMC Media Center' with protocol version '6'
Dec 26 12:15:56 vdr01 vdr: [9700] VNSI: Requesting clients to reload channel list
Dec 26 12:15:56 vdr01 vdr: [9687] epg data reader thread ended (pid=9684, tid=9687)
Dec 26 12:15:56 vdr01 vdr: [9684] DVBAPI: 0.0: doReply changed, reset triggered
Dec 26 12:15:56 vdr01 vdr: [9684] DVBAPI: 0.0: now using CAIDs version 1
Dec 26 12:15:56 vdr01 vdr: [9684] DVBAPI: 0.0: status 'present'
Dec 26 12:15:56 vdr01 vdr: [9684] DVBAPI: 1.0: doReply changed, reset triggered
Dec 26 12:15:56 vdr01 vdr: [9684] DVBAPI: 1.0: now using CAIDs version 1
Dec 26 12:15:56 vdr01 vdr: [9684] DVBAPI: 1.0: status 'present'
Dec 26 12:15:57 vdr01 vdr: [9684] DVBAPI: 0.0: status 'reset'
Dec 26 12:15:57 vdr01 vdr: [9697] DVBAPI: 0.0: status 'ready'
Dec 26 12:15:57 vdr01 vdr: [9697] CAM 2: module ready
Dec 26 12:15:57 vdr01 vdr: [9684] DVBAPI: 1.0: status 'reset'
Dec 26 12:15:57 vdr01 vdr: [9698] DVBAPI: 1.0: status 'ready'
Dec 26 12:15:57 vdr01 vdr: [9698] CAM 3: module ready
Dec 26 12:15:57 vdr01 vdr: [9697] DVBAPI: CaInfo: 0.0 sending CA info
Dec 26 12:15:57 vdr01 vdr: [9697] CAM 2: system ids: FFFF
Dec 26 12:15:57 vdr01 vdr: [9698] DVBAPI: CaInfo: 1.0 sending CA info
Dec 26 12:15:57 vdr01 vdr: [9698] CAM 3: system ids: FFFF
Dec 26 12:15:58 vdr01 vdr: [9692] CAM 1: no module present
Dec 26 12:15:58 vdr01 vdr: [9697] CAM 2: replies to QUERY - multi channel decryption possible
Dec 26 12:15:58 vdr01 vdr: [9698] CAM 3: replies to QUERY - multi channel decryption possible
Dec 26 12:15:58 vdr01 vdr: [9684] switching to channel 1
Dec 26 12:15:58 vdr01 vdr: [9684] OSD size changed to 720x480 @ 1
Dec 26 12:15:58 vdr01 vdr: [9684] ERROR: no OSD provider available - using dummy OSD!
Dec 26 12:15:58 vdr01 vdr: [9684] ERROR: Kanal blockiert (zeichnet auf)!
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel zdf.kultur HD, id: 2054877818
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel zdf_neo HD, id: 893084861
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel ZDFinfo HD, id: 1998629389
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel KiKA HD, id: 1849400140
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel ZDF HD, id: 118294079
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel 3sat HD, id: 1159121039
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel arte HD, id: 2026875710
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel SWR BW HD, id: 264805288
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel Das Erste HD, id: 1640430212
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel N24 HD, id: 1152965199
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel HSE24 HD, id: 1292801636
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel NICKELODEON HD, id: 1409796062
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel QVC HD, id: 1399456711
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel PHOENIX HD, id: 63227088
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel VOX HD, id: 1055743585
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel RTL HD, id: 1240100599
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel n-tv HD, id: 1317513966
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel RTLII HD, id: 964729464
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel SPORT1 HD, id: 376175300
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel Disney Channel HD, id: 1711345227
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel hr-fernsehen HD, id: 586583462
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel MDR Sachsen HD, id: 1016207365
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel rbb Brandenburg HD, id: 1385986345
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel QVC BEAUTY & STYLE HD, id: 58372800
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel MTV HD, id: 1780029429
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel tagesschau24 HD, id: 1808772903
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel EinsPlus HD, id: 96587275
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel Einsfestival HD, id: 1925643933
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel SUPER RTL HD, id: 80677879
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel RTLNitro HD, id: 1385540721
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel ServusTV HD Deutschland, id: 1445063614
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel NDR FS HH HD, id: 335838627
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel BR Nord HD, id: 79388722
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel WDR HD Wuppertal, id: 550145840
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel ProSieben MAXX HD, id: 1259327011
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel SAT.1 HD, id: 1281493562
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel kabel eins HD, id: 577530646
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel ProSieben HD, id: 996489900
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel SIXX HD, id: 1433099136
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel pearl.tv HD Shop, id: 167661351
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel TELE 5 HD, id: 2039790504
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel DMAX HD, id: 1620961810
Dec 26 12:16:07 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel SAT.1 Gold, id: 51914112
Dec 26 12:17:01 vdr01 CRON[9772]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Dec 26 12:17:29 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel VOX HD, id: 1055743585
Dec 26 12:17:29 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel RTL HD, id: 1240100599
Dec 26 12:17:29 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel n-tv HD, id: 1317513966
Dec 26 12:17:29 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel RTLII HD, id: 964729464
Dec 26 12:17:29 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel SUPER RTL HD, id: 80677879
Dec 26 12:17:32 vdr01 vdr: [9699] loading /var/lib/vdr/plugins/vnsiserver/allowed_hosts.conf
Dec 26 12:17:32 vdr01 vdr: [9699] VNSI: Client with ID 1 connected: 192.168.178.33:39711
Dec 26 12:17:32 vdr01 vdr: [9807] VNSI: Welcome client 'XBMC Media Center' with protocol version '6'
Dec 26 12:17:32 vdr01 vdr: [9807] VNSI: LiveStreamer::Close - close
Dec 26 12:17:32 vdr01 vdr: [9807] VNSI: close video input ...
Dec 26 12:17:32 vdr01 vdr: [9807] VNSI: Successfully switched to channel 1 - Das Erste HD
Dec 26 12:17:32 vdr01 vdr: [9807] VNSI: Started streaming of channel Das Erste HD (timeout 10 seconds)
Dec 26 12:17:32 vdr01 vdr: [9808] receiver on device 1 thread started (pid=9684, tid=9808, prio=high)
Dec 26 12:17:32 vdr01 vdr: [9810] cLiveStreamer stream processor thread started (pid=9684, tid=9810, prio=high)
Dec 26 12:17:32 vdr01 vdr: [9811] TS buffer on device 1 thread started (pid=9684, tid=9811, prio=high)
Dec 26 12:17:33 vdr01 vdr: [9690] VNSI: Video Input - new pmt, attaching receiver
Dec 26 12:17:33 vdr01 vdr: [9810] VNSI: Created stream for pid=5101 and type=8
Dec 26 12:17:33 vdr01 vdr: [9810] VNSI: Created stream for pid=5106 and type=1
Dec 26 12:17:33 vdr01 vdr: [9810] VNSI: Created stream for pid=5102 and type=2
Dec 26 12:17:33 vdr01 vdr: [9810] VNSI: Created stream for pid=5103 and type=2
Dec 26 12:17:33 vdr01 vdr: [9810] VNSI: Created stream for pid=5105 and type=9
Dec 26 12:17:33 vdr01 vdr: [9810] VNSI: Created stream for pid=5104 and type=11
Dec 26 12:17:41 vdr01 vdr: [9810] VNSI: exit streamer thread
Dec 26 12:17:41 vdr01 vdr: [9810] cLiveStreamer stream processor thread ended (pid=9684, tid=9810)
Dec 26 12:17:41 vdr01 vdr: [9807] VNSI: LiveStreamer::Close - close
Dec 26 12:17:41 vdr01 vdr: [9807] VNSI: close video input ...
Dec 26 12:17:41 vdr01 vdr: [9807] VNSI: call retune ...
Dec 26 12:17:41 vdr01 vdr: [9807] VNSI: call retune ...
Dec 26 12:17:41 vdr01 vdr: [9807] VNSI: close video input ...
Dec 26 12:17:41 vdr01 vdr: [9807] VNSI: LiveStreamer::Close - close
Dec 26 12:17:41 vdr01 vdr: [9807] VNSI: close video input ...
Dec 26 12:17:41 vdr01 vdr: [9811] TS buffer on device 1 thread ended (pid=9684, tid=9811)
Dec 26 12:17:41 vdr01 vdr: [9807] CAM 2: assigned to device 1
Dec 26 12:17:41 vdr01 vdr: [9808] buffer stats: 205296 (3%) used
Dec 26 12:17:41 vdr01 vdr: [9808] receiver on device 1 thread ended (pid=9684, tid=9808)
Dec 26 12:17:41 vdr01 vdr: [9822] receiver on device 1 thread started (pid=9684, tid=9822, prio=high)
Dec 26 12:17:41 vdr01 vdr: [9807] VNSI: Successfully switched to channel 3 - RTL HD
Dec 26 12:17:41 vdr01 vdr: [9824] cLiveStreamer stream processor thread started (pid=9684, tid=9824, prio=high)
Dec 26 12:17:41 vdr01 vdr: [9825] TS buffer on device 1 thread started (pid=9684, tid=9825, prio=high)
Dec 26 12:17:41 vdr01 vdr: [9807] VNSI: Started streaming of channel RTL HD (timeout 10 seconds)
Dec 26 12:17:42 vdr01 vdr: [9690] VNSI: Video Input - new pmt, attaching receiver
Dec 26 12:17:42 vdr01 vdr: [9690] DVBAPI: 0.0 set CAM decrypt (SID 61200 (0xEF10), caLm 4, HasCaDescriptors 1)
Dec 26 12:17:42 vdr01 vdr: [9824] VNSI: Created stream for pid=255 and type=8
Dec 26 12:17:42 vdr01 vdr: [9824] VNSI: Created stream for pid=259 and type=1
Dec 26 12:17:42 vdr01 vdr: [9824] VNSI: Created stream for pid=48 and type=9
Dec 26 12:17:42 vdr01 vdr: [9824] VNSI: Created stream for pid=32 and type=11
Dec 26 12:18:53 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel ServusTV HD Deutschland, id: 1445063614
Dec 26 12:19:48 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel ProSieben MAXX HD, id: 1259327011
Dec 26 12:19:48 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel SAT.1 HD, id: 1281493562
Dec 26 12:19:48 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel kabel eins HD, id: 577530646
Dec 26 12:19:48 vdr01 vdr: [9700] VNSI: Trigger EPG update for channel ProSieben HD, id: 996489900

Kann man dies abändern ?

DDD · 26. Dezember 2014

Man kann doch das EPG in den XBMC Settings konfigurieren?! Bewirkt das nichts?

CvH · 26. Dezember 2014

"verhindere EPG update bei Wiedergabe", weiß aber nicht aber nicht ob das was bei dem Server/Client Modell bringt. Zur Not Bei OE das pvr.VNSI Addon nehmen -> Einstellungen -> TV -> Clientspezifische Einstellungen -> EPG -> wegen updates gucken.

fwberni · 27. Dezember 2014

habe es mal aktiviert "verhintere EPG upadte bei Wiedergabe" und mom. sieht das log so aus: bzw. beim starten von Kodi/XBMC vom PC/LinuxMint

Dec 27 15:21:13 vdr01 vdr: [1290] loading /var/lib/vdr/plugins/vnsiserver/allowed_hosts.conf
Dec 27 15:21:13 vdr01 vdr: [1290] VNSI: Client with ID 3 connected: 192.168.178.15:57737
Dec 27 15:21:13 vdr01 vdr: [5300] VNSI: Welcome client 'XBMC osd client' with protocol version '6'
Dec 27 15:21:13 vdr01 vdr: [5300] VNSI: new osd provider
Dec 27 15:21:13 vdr01 vdr: [5300] VNSI: new osd provider
Dec 27 15:22:18 vdr01 vdr: [5300] VNSI: cxSocket::read: eof, connection closed
Dec 27 15:22:18 vdr01 vdr: [1291] VNSI: Client with ID 3 seems to be disconnected, removing from client list

mehr kam da nicht. hoffe das es so bleibt. jetzt nur noch auf Openelec einstellen etc.....

bei Openelec "vnsiserver" habe ich folgendes eingestellt: "Avoid EPG scan while streaming" = nein

schade irgendwie macht vnsi Probleme: die 1. u. letzte Meldung macht mich sehr stutzig.

Dec 27 15:49:23 vdr01 vdr: [8011] VNSI: close video input ...
Dec 27 15:49:35 vdr01 vdr: [8110] VDR version 2.1.6 started
Dec 27 15:49:35 vdr01 vdr: [8110] switched to user 'vdruser'
Dec 27 15:49:35 vdr01 vdr: [8110] codeset is 'UTF-8' - known
Dec 27 15:49:35 vdr01 vdr: [8110] found 28 locales in /usr/local/share/locale
Dec 27 15:49:35 vdr01 vdr: [8110] loading plugin: /usr/local/lib/vdr/libvdr-streamdev-server.so.2.1.6
Dec 27 15:49:35 vdr01 vdr: [8110] loading plugin: /usr/local/lib/vdr/libvdr-dvbapi.so.2.1.6
Dec 27 15:49:35 vdr01 vdr: [8110] loading plugin: /usr/local/lib/vdr/libvdr-vnsiserver.so.2.1.6
Dec 27 15:49:35 vdr01 vdr: [8110] loading /var/lib/vdr/setup.conf
Dec 27 15:49:35 vdr01 vdr: [8110] loading /var/lib/vdr/channels.conf
Dec 27 15:49:35 vdr01 vdr: [8110] loading /var/lib/vdr/timers.conf
Dec 27 15:49:35 vdr01 vdr: [8110] loading /var/lib/vdr/remote.conf
Dec 27 15:49:35 vdr01 vdr: [8110] registered source parameters for 'A - ATSC'
Dec 27 15:49:35 vdr01 vdr: [8110] registered source parameters for 'C - DVB-C'
Dec 27 15:49:35 vdr01 vdr: [8110] registered source parameters for 'S - DVB-S'
Dec 27 15:49:35 vdr01 vdr: [8110] registered source parameters for 'T - DVB-T'
Dec 27 15:49:35 vdr01 vdr: [8112] video directory scanner thread started (pid=8110, tid=8112, prio=high)
Dec 27 15:49:35 vdr01 vdr: [8110] probing /dev/dvb/adapter0/frontend0
Dec 27 15:49:35 vdr01 vdr: [8110] creating cDvbDevice
Dec 27 15:49:35 vdr01 vdr: [8110] new device number 1
Dec 27 15:49:35 vdr01 vdr: [8111] video directory scanner thread started (pid=8110, tid=8111, prio=high)
Dec 27 15:49:35 vdr01 vdr: [8113] epg data reader thread started (pid=8110, tid=8113, prio=high)
Dec 27 15:49:35 vdr01 vdr: [8113] reading EPG data from /var/cache/vdr/epg.data
Dec 27 15:49:35 vdr01 vdr: [8112] video directory scanner thread ended (pid=8110, tid=8112)
Dec 27 15:49:35 vdr01 vdr: [8111] video directory scanner thread ended (pid=8110, tid=8111)
Dec 27 15:49:35 vdr01 vdr: [8110] DVB API version is 0x050A (VDR was built with 0x050A)
Dec 27 15:49:35 vdr01 vdr: [8110] frontend 0/0 provides DVB-S,DVB-S2 with QPSK ("Montage DS3103/TS2022")
Dec 27 15:49:35 vdr01 vdr: [8110] cTimeMs: using monotonic clock (resolution is 1 ns)
Dec 27 15:49:35 vdr01 vdr: [8115] tuner on frontend 0/0 thread started (pid=8110, tid=8115, prio=high)
Dec 27 15:49:35 vdr01 vdr: [8116] section handler thread started (pid=8110, tid=8116, prio=low)
Dec 27 15:49:35 vdr01 vdr: [8110] probing /dev/dvb/adapter1/frontend0
Dec 27 15:49:35 vdr01 vdr: [8110] creating cDvbDevice
Dec 27 15:49:35 vdr01 vdr: [8110] new device number 2
Dec 27 15:49:35 vdr01 vdr: [8118] CI adapter on device 1 thread started (pid=8110, tid=8118, prio=high)
Dec 27 15:49:35 vdr01 vdr: [8110] frontend 1/0 provides DVB-S,DVB-S2 with QPSK ("Montage DS3103/TS2022")
Dec 27 15:49:35 vdr01 vdr: [8110] found 2 DVB devices
Dec 27 15:49:35 vdr01 vdr: [8119] tuner on frontend 1/0 thread started (pid=8110, tid=8119, prio=high)
Dec 27 15:49:35 vdr01 vdr: [8110] initializing plugin: streamdev-server (0.6.1-git): VDR Streaming Server
Dec 27 15:49:35 vdr01 vdr: [8110] initializing plugin: dvbapi (2.1.1-GIT-36a6b1d): SoftCAM für OSCam
Dec 27 15:49:35 vdr01 vdr: [8110] initializing plugin: vnsiserver (1.2.0): VDR-Network-Streaming-Interface (VNSI) Server
Dec 27 15:49:35 vdr01 vdr: [8110] setting primary device to 2
Dec 27 15:49:35 vdr01 vdr: [8110] device 2 has no MPEG decoder
Dec 27 15:49:35 vdr01 vdr: [8110] assuming manual start of VDR
Dec 27 15:49:35 vdr01 vdr: [8110] SVDRP listening on port 6419
Dec 27 15:49:35 vdr01 vdr: [8110] setting current skin to "sttng"
Dec 27 15:49:35 vdr01 vdr: [8110] loading /var/lib/vdr/themes/sttng-default.theme
Dec 27 15:49:35 vdr01 vdr: [8110] starting plugin: streamdev-server
Dec 27 15:49:35 vdr01 vdr: [8110] loading /var/lib/vdr/plugins/streamdev-server/streamdevhosts.conf
Dec 27 15:49:35 vdr01 vdr: [8120] section handler thread started (pid=8110, tid=8120, prio=low)
Dec 27 15:49:35 vdr01 vdr: [8110] starting plugin: dvbapi
Dec 27 15:49:35 vdr01 vdr: [8110] DVBAPI: plugin version 2.1.1-GIT-36a6b1d initializing (VDR 2.1.6)
Dec 27 15:49:35 vdr01 vdr: [8110] DVBAPI: decryption library: FFdecsa
Dec 27 15:49:35 vdr01 vdr: [8110] DVBAPI: Creating sCCIAdapter for device 0
Dec 27 15:49:35 vdr01 vdr: [8121] streamdev server thread started (pid=8110, tid=8121, prio=high)
Dec 27 15:49:35 vdr01 vdr: [8110] DVBAPI: Creating sCCIAdapter for device 1
Dec 27 15:49:35 vdr01 vdr: [8122] Socket Handler thread started (pid=8110, tid=8122, prio=high)
Dec 27 15:49:35 vdr01 vdr: [8110] DVBAPI: plugin started
Dec 27 15:49:35 vdr01 vdr: [8110] starting plugin: vnsiserver
Dec 27 15:49:35 vdr01 vdr: [8121] Streamdev: Listening (VTP) on port 2004
Dec 27 15:49:35 vdr01 vdr: [8121] Streamdev: Listening (HTTP) on port 3000
Dec 27 15:49:35 vdr01 vdr: [8110] VNSI: VNSI Server started
Dec 27 15:49:35 vdr01 vdr: [8110] VNSI: Channel streaming timeout: 10 seconds
Dec 27 15:49:35 vdr01 vdr: [8124] SC-CI adapter on device 1 thread started (pid=8110, tid=8124, prio=high)
Dec 27 15:49:35 vdr01 vdr: [8125] VDR VNSI Server thread started (pid=8110, tid=8125, prio=high)
Dec 27 15:49:35 vdr01 vdr: [8123] SC-CI adapter on device 0 thread started (pid=8110, tid=8123, prio=high)
Dec 27 15:49:35 vdr01 vdr: [8113] epg data reader thread ended (pid=8110, tid=8113)
Dec 27 15:49:35 vdr01 vdr: [8110] DVBAPI: 0.0: doReply changed, reset triggered
Dec 27 15:49:35 vdr01 vdr: [8110] DVBAPI: 0.0: now using CAIDs version 1
Dec 27 15:49:35 vdr01 vdr: [8110] DVBAPI: 0.0: status 'present'
Dec 27 15:49:35 vdr01 vdr: [8110] DVBAPI: 1.0: doReply changed, reset triggered
Dec 27 15:49:35 vdr01 vdr: [8110] DVBAPI: 1.0: now using CAIDs version 1
Dec 27 15:49:35 vdr01 vdr: [8110] DVBAPI: 1.0: status 'present'
Dec 27 15:49:35 vdr01 vdr: [8110] DVBAPI: 0.0: status 'reset'
Dec 27 15:49:36 vdr01 vdr: [8123] DVBAPI: 0.0: status 'ready'
Dec 27 15:49:36 vdr01 vdr: [8123] CAM 2: module ready
Dec 27 15:49:36 vdr01 vdr: [8124] DVBAPI: 1.0: status 'reset'
Dec 27 15:49:36 vdr01 vdr: [8123] DVBAPI: CaInfo: 0.0 sending CA info
Dec 27 15:49:36 vdr01 vdr: [8123] CAM 2: system ids: FFFF
Dec 27 15:49:36 vdr01 vdr: [8110] DVBAPI: 1.0: status 'ready'
Dec 27 15:49:36 vdr01 vdr: [8125] loading /var/lib/vdr/plugins/vnsiserver/allowed_hosts.conf
Dec 27 15:49:36 vdr01 vdr: [8125] VNSI: Client with ID 0 connected: 192.168.178.33:40515
Dec 27 15:49:36 vdr01 vdr: [8130] VNSI: Welcome client 'XBMC Media Center' with protocol version '6'
Dec 27 15:49:36 vdr01 vdr: [8125] loading /var/lib/vdr/plugins/vnsiserver/allowed_hosts.conf
Dec 27 15:49:36 vdr01 vdr: [8125] VNSI: Client with ID 1 connected: 192.168.178.15:59565
Dec 27 15:49:36 vdr01 vdr: [8131] VNSI: Welcome client 'XBMC Media Center' with protocol version '6'
Dec 27 15:49:36 vdr01 vdr: [8126] VNSI: Requesting clients to reload channel list
Dec 27 15:49:36 vdr01 vdr: [8124] CAM 3: module ready
Dec 27 15:49:36 vdr01 vdr: [8124] DVBAPI: CaInfo: 1.0 sending CA info
Dec 27 15:49:36 vdr01 vdr: [8124] CAM 3: system ids: FFFF
Dec 27 15:49:37 vdr01 vdr: [8123] CAM 2: replies to QUERY - multi channel decryption possible
Dec 27 15:49:37 vdr01 vdr: [8118] CAM 1: no module present
Dec 27 15:49:37 vdr01 vdr: [8124] CAM 3: replies to QUERY - multi channel decryption possible
Dec 27 15:49:37 vdr01 vdr: [8110] switching to channel 1
Dec 27 15:49:37 vdr01 vdr: [8110] OSD size changed to 720x480 @ 1
Dec 27 15:49:37 vdr01 vdr: [8110] ERROR: no OSD provider available - using dummy OSD!
Dec 27 15:49:38 vdr01 vdr: [8110] ERROR: Kanal blockiert (zeichnet auf)!

Die Meldungen gibts nach wie vor:

Dec 27 15:52:01 vdr01 vdr: [8126] VNSI: Trigger EPG update for channel RTL HD, id: 1240100599
Dec 27 15:52:01 vdr01 vdr: [8126] VNSI: Trigger EPG update for channel RTLII HD, id: 964729464
Dec 27 15:52:01 vdr01 vdr: [8126] VNSI: Trigger EPG update for channel SUPER RTL HD, id: 80677879
Dec 27 15:52:21 vdr01 vdr: [8126] VNSI: Trigger EPG update for channel RTL HD, id: 1240100599
Dec 27 15:52:21 vdr01 vdr: [8126] VNSI: Trigger EPG update for channel RTLII HD, id: 964729464
Dec 27 15:52:21 vdr01 vdr: [8126] VNSI: Trigger EPG update for channel SUPER RTL HD, id: 80677879
Dec 27 15:52:32 vdr01 vdr: [8126] VNSI: Trigger EPG update for channel RTL HD, id: 1240100599
Dec 27 15:52:32 vdr01 vdr: [8126] VNSI: Trigger EPG update for channel RTLII HD, id: 964729464
Dec 27 15:52:32 vdr01 vdr: [8126] VNSI: Trigger EPG update for channel SUPER RTL HD, id: 80677879
Dec 27 15:52:43 vdr01 vdr: [8126] VNSI: Trigger EPG update for channel RTL HD, id: 1240100599
Dec 27 15:52:43 vdr01 vdr: [8126] VNSI: Trigger EPG update for channel RTLII HD, id: 964729464
Dec 27 15:52:43 vdr01 vdr: [8126] VNSI: Trigger EPG update for channel SUPER RTL HD, id: 80677879
Dec 27 15:53:03 vdr01 vdr: [8126] VNSI: Trigger EPG update for channel RTL HD, id: 1240100599
Dec 27 15:53:03 vdr01 vdr: [8126] VNSI: Trigger EPG update for channel RTLII HD, id: 964729464
Dec 27 15:53:03 vdr01 vdr: [8126] VNSI: Trigger EPG update for channel SUPER RTL HD, id: 80677879

Nafi · 27. Dezember 2014

"Avoid EPG scan while streaming" = nein

versuch halt mal ja

Dec 27 15:49:37 vdr01 vdr: [8110] ERROR: no OSD provider available - using dummy OSD!
Dec 27 15:49:38 vdr01 vdr: [8110] ERROR: Kanal blockiert (zeichnet auf)!

ist normal, dass dies nach dem starten kurz kommt.

fwberni · 27. Dezember 2014

war nicht so gut auf ja zu setzen:

Dec 27 16:49:40 vdr01 vdr: [1292] VNSI: Trigger EPG update for channel ZDFinfo HD, id: 1998629389
Dec 27 16:49:40 vdr01 vdr: [1292] VNSI: Trigger EPG update for channel ZDFinfo HD, id: 1998629389
Dec 27 16:49:56 vdr01 vdr: [1291] loading /var/lib/vdr/plugins/vnsiserver/allowed_hosts.conf
Dec 27 16:49:56 vdr01 vdr: [1291] VNSI: Client with ID 2 connected: 192.168.178.33:40574
Dec 27 16:49:56 vdr01 vdr: [1751] VNSI: Welcome client 'XBMC Media Center' with protocol version '6'
Dec 27 16:49:56 vdr01 vdr: [1751] VNSI: LiveStreamer::Close - close
Dec 27 16:49:56 vdr01 vdr: [1751] VNSI: close video input ...
Dec 27 16:49:56 vdr01 vdr: [1751] CAM 2: assigned to device 1
Dec 27 16:49:56 vdr01 vdr: [1753] receiver on device 1 thread started (pid=1215, tid=1753, prio=high)
Dec 27 16:49:56 vdr01 vdr: [1751] VNSI: Successfully switched to channel 14 - SUPER RTL HD
Dec 27 16:49:56 vdr01 vdr: [1751] VNSI: Started streaming of channel SUPER RTL HD (timeout 10 seconds)
Dec 27 16:49:56 vdr01 vdr: [1755] cLiveStreamer stream processor thread started (pid=1215, tid=1755, prio=high)
Dec 27 16:49:56 vdr01 vdr: [1756] TS buffer on device 1 thread started (pid=1215, tid=1756, prio=high)
Dec 27 16:49:59 vdr01 vdr: [1276] VNSI: Video Input - new pmt, attaching receiver
Dec 27 16:49:59 vdr01 vdr: [1276] DVBAPI: 0.0 set CAM decrypt (SID 11931 (0x2E9B), caLm 4, HasCaDescriptors 1)
Dec 27 16:49:59 vdr01 vdr: [1755] VNSI: Created stream for pid=300 and type=8
Dec 27 16:49:59 vdr01 vdr: [1755] VNSI: Created stream for pid=310 and type=1
Dec 27 16:49:59 vdr01 vdr: [1755] VNSI: Created stream for pid=330 and type=9
Dec 27 16:49:59 vdr01 vdr: [1755] VNSI: Created stream for pid=320 and type=11
Dec 27 16:49:59 vdr01 vdr: [1288] DVBAPI-Error: Action: read failed unknown command: 00876f08
Dec 27 16:49:59 vdr01 vdr: [1288] DVBAPI-Error: Action: read failed unknown command: 002c0100
Dec 27 16:49:59 vdr01 vdr: [1288] DVBAPI-Error: Action: read failed unknown command: 08400000
Dec 27 16:49:59 vdr01 vdr: [1288] DVBAPI-Error: Action: read failed unknown command: 00000087
Dec 27 16:49:59 vdr01 vdr: [1288] DVBAPI-Error: Action: read failed unknown command: 00000036
Dec 27 16:49:59 vdr01 vdr: [1288] DVBAPI-Error: SetCaPid: Parameter(s) out of range: adapter_index=0, pid=0x0001, index=0x4a000000
Dec 27 16:50:03 vdr01 vdr: [1755] VNSI-Error: cParser::AddPESPacket - max buffer size reached, pid: 300
Dec 27 16:50:05 vdr01 vdr: [1755] VNSI-Error: cParser::AddPESPacket - max buffer size reached, pid: 300
Dec 27 16:50:06 vdr01 vdr: [1755] VNSI: Channel: scrambled 7
Dec 27 16:50:08 vdr01 vdr: [1288] DVBAPI-Error: Action: read failed unknown command: 106f8600
Dec 27 16:50:08 vdr01 vdr: [1288] DVBAPI-Error: Action: read failed unknown command: 00000000
Dec 27 16:50:08 vdr01 vdr: [1288] DVBAPI-Error: Action: read failed unknown command: 000142bf
Dec 27 16:50:08 vdr01 vdr: [1288] DVBAPI-Error: Action: read failed unknown command: 625fcefd
Dec 27 16:50:09 vdr01 vdr: [1755] VNSI-Error: cParser::AddPESPacket - max buffer size reached, pid: 300
Dec 27 16:50:13 vdr01 vdr: [1755] VNSI-Error: cParser::AddPESPacket - max buffer size reached, pid: 300
Dec 27 16:50:16 vdr01 vdr: [1755] VNSI: Channel: startcode 5
Dec 27 16:50:17 vdr01 vdr: [1755] VNSI-Error: cParser::AddPESPacket - max buffer size reached, pid: 300
Dec 27 16:50:18 vdr01 vdr: [1288] DVBAPI-Error: Action: read failed unknown command: 106f8600
Dec 27 16:50:18 vdr01 vdr: [1288] DVBAPI-Error: Action: read failed unknown command: 00000000
Dec 27 16:50:18 vdr01 vdr: [1288] DVBAPI-Error: Action: read failed unknown command: 000059fa
Dec 27 16:50:18 vdr01 vdr: [1288] DVBAPI-Error: Action: read failed unknown command: 1ece96a9

habe es wieder auf nein gesetzt. Aber die Meldungen von "VNSI: Trigger EPG update for channel....." kommen nach wie vor.

pyro · 30. Dezember 2014

Wer benutzt das Openelec Plugin xmltv2vdr?

Wie muss ich den da vorgehen?

DDD · 30. Dezember 2014

Ich hatte es mal vor und hatte hier mal Links dazu gesammelt, bin aber noch nicht dazu gekommen es auszuprobieren

http://www.kodinerds.net/index.php/Thread/14333-Openelec-LiveTV/?postID=137994#post137994

pyro · 30. Dezember 2014

Ich hab jetzt mal diese XML Datei genommen.

Diese hier hin kopiert : /storage/.kodi/userdata/addon_data/service.multimedia.vdr-addon/config/epgsources

epgdata2xmltv
epgdata2xmltv.xml

Plugin is aktiv,nur da passiert nix.Is wohl doch was für Profis

CvH · 31. Dezember 2014

so so

ob das jetzt schon "raus" sollte ;D

DDD · 31. Dezember 2014

Gott bewahre

pyro · 1. Januar 2015

Bin ein wenig weiter gekommen

Unter Live-TV--Clientspezifisch--Clientspezifisch Einstellungen--OSD Steuerung

Gemappt sind die Kanäle,nur er holt sich immer noch den Epg über DVB

Leserartikel HTPC How-To (Linux XBMC + LiveTV Intel ink HD Beschl.)

Commander

Captain

Ensign

Commander

Captain

Commander

Captain

Commander

Cadet 1st Year

Rear Admiral

Commander

Cadet 1st Year

Captain

Cadet 1st Year

Cadet 4th Year

Rear Admiral

Cadet 4th Year

Commander

Rear Admiral

Cadet 4th Year

Passend zum Thema